Rear Camber Bolt Kit, 2013-16 Dart

Review star icon Review star icon Review star icon Review star icon Review star icon
Model Number: 226302-ALIGNMENT

If you have a 2013-16 Dart and are going to lower your it more than 1.4-1.5 inches, this is an important piece. The rear wheels of the car will camber in, and that causes accelerated inner tire wear which is not good. So, with this camber bolt kit, it allows further adjustment, which allows your alignment shop to get your wheels back to factory spec, which allows your tires to last longer!

A lot of customers ask us if this is really needed when dropping their Dart more than 1.4 inches, and the answer simply is YES.

  • Works great with lowering springs and coilovers.
  • These camber bolts allow for an additional 1.5 degrees of camber adjustment BEYOND factory spec.
  • These are only for the rear of the car, which is the problem area on the Dart and Renegade when lowering.

  • cole
    Will these be able to give you more negative camber?
    1 Answer
    • customer service rep

      Although this product is designed to get rid of negative camber, it does allow for more camber adjustment and would allow more negative camber.
  • Andrew
    So if I buy this with the eibach sport line springs, these will put my tires back to factory ( no camber )?
    1 Answer
    • customer service rep

      After you install the sportline springs, and this camber kit, you can get an alignment done and get it very close to factory spec, yes.
  • Bailey
    in the kit is there 4 bolts or do I need to buy two kits to do my whole car?
    1 Answer
    • customer service rep

      Just as pictured, there are two bolts, and corresponding shims and nuts. One order of these completes the rear alignment. These are not used for front alignment. Your alignment shop can do the front alignment, and then adjust the rear with this kit.
  • Josh m
    Is this necessary if I'm planning to purchase the BC coilovers and lower by approximately 3" or is it only necessary when using lowering springs?
    1 Answer
    • Customer Service Rep

      If you plan on lowering your Dart with any spring, or coilover more than 1.75-2 inches you'll need this camber bolt kit.
  • Mike
    I understand that my shop will align the front but I'm a little fuzzy about this camber kit. Do I put these on and then there is an additional servicing needed to them so they are accurate or do I provide this kit to my shop so they can install them?
    1 Answer
    • Customer Service Rep

      These camber bolts, replace your factory bolts. These allow adjustment, whereas the factory bolts are fixed. With these camber bolts, you can adjust the bolts position and change the camber to compensate for lowered Darts.
  • Tyler
    My shop told me they physically cant get my rear suspension to sit correctly since new. It always wears the insides of my tires if they arent rotated properly. Will this product fix the negative camber that these cars are designed with?
    1 Answer
    • Customer Service Rep

      If you have negative camber currently and want to adjust it out, this will give you further camber adjustment to try and adjust the negative camber out further. It sounds like this is what you need.
  • Misha
    Forgive me if this is a dumb question, I'm not super familiar with the suspension hardware yet. Could you please briefly explain how this works to correct the camber? Because to me it looks like a couple of bolts with some weird shaped washers. Thanks!
    1 Answer
    • Customer Service Rep

      These specially made bolts have cams on them that change the angle of the rear suspension depending on how much the bolt is rotated. Regular bolts are straight and are not adjustable, but these are.
Close