MSD Spark Plug Wires, 95-99 Neon 2.0 DOHC/Neon SRT-4/PT Cruiser
Model Number: 221127-DOHC
MSD Wires for the DOHC 2.0L Neon and Mitsubishi Eclipse non turbo. These can also be used on the 2003-2005 Dodge SRT-4 and 2001-2010 PT Cruiser 2.4 turbo and non turbo engine.
The MSD 8.5mm Super Conductor Wire is "the" performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference!
In a single 12 inch length of Super Conductor Wire there is only 40 - 50ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it's great voltage carrying capabilities. This conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) "choke".
This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The EMI suppression capability of the 8.5mm wire is equal to a 1,500 ohm per foot wire except you can get 30 times more spark energy delivered to the plug!
The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears.
NOTE: These plug wires will work with all factory style plugs, like the Champion plugs, and the NGK iridium plugs that we sell. If your using some sort of non standard size plug, like a NGK V power, or some other weird plug these may not fit.
Don't let this happen to you.
Recently we were fitting one of our project SRT-4's with new ignition wires for a photo op. It was during that time, that we noticed the charred and damaged stock ignition wires. Our project SRT-4 had less then 5000 miles on it, and this was the condition of the wires. We highly recommend that all SRT-4 and GT Cruisers owners pay close attention to their spark plug wires and replace as necessary with wires, such as those listed on this page, that withstand the increased heat the SRT-4 and GT Cruiser engines bays are subjected to.
