K1 Technologies H-Beam Connecting Rods, 08-09 Caliber SRT-4
+ ENLARGE IMAGE
Email iconEmail a Friend

K1 Technologies H-Beam Connecting Rods, 08-09 Caliber SRT-4

Model Number: 223196

We now carry K1 Technologies H-Beam Connecting Rods for the 08-09 Caliber SRT-4.

These rods can support up to 600 horsepower and beyond. These will work great with your factory crank, and with factory or aftermarket rod bearings.

K1 Technologies connecting rods are manufactured with optimized strength and weight characteristics in mind to deliver reliable performance. Forged from 4340 steel, K1 rods featured a shot-peened surface finish which smooths surface blends and reduces potential stress profiles. K1 connecting rods are held to strict quality standards and undergo magnetic particle testing to ensure material properties are free of flaws. Each rod is also subject to bore tolerance compliance, holding them to +/- .0001" after finishing. Additionally, K1 rods are balanced and tested to be within +/- 1 gram per end. A dual-ribbing design on the rod caps of K1 connecting rods helps maximize strength and allows the rod big end to maintain roundness as engine RPMs increase. Full-floating, precision-honed bronze bushings are fixed into the small ends of the rods for low friction and high wear resistance. Fitted with ARP 2000 rod bolts rated at 200,000 psi tensile strength for most applications, K1 connecting rods deliver an industry-leading combination of strength and value.

This listing is for a set of four rods. These rods include ARP 2000 rod bolts for serious horsepower holding capacity!

These rods will NOT work on OEM pistons

Rod specs:

  • Center to Center length 5.618
  • Main Bearing Bore Diameter 2.008
  • Main Bearing Width .860
  • Pin End Bore 22.00
  • H-Beam Rod
  • Wrist Pin Journal Bushing Width .985
  • Wrist Pin Style - Floating
  • Pin Diameter .866

    • *Backordered: 5/29/2024
    $459.99
    K1 Technologies H-Beam Connecting Rods, 08-09 Caliber SRT-4, Rotating Assembly: Store Name

    Ask a Product Question
    • Chris
      With these rods, will OEM rod bearings work or would we need different size
      1 Answer
      • Customer Service Rep
        Correct, these are designed for OEM sized rod bearings.
    • Jason Hinrichs
      I see you said these work with oem rod bearings, but oem rod bearings are listed in 3 sizes. Which is it?
      1 Answer
      • Customer Service Rep
        These work with all bearing sizes, because the variance in the rod bearing is not on the rod side of the bearing, its in the inner portion of the bearing. Because if you machine the crankshaft due to problems/scoring, then you need a thicker bearing, and that's on the crankshaft side of the bearing, not the rod.
    • devin
      i would like to see dimensions of the part. where can i find that info?
      1 Answer
      • Customer Service Rep
        We have uploaded a hand drawn measurement photo of the specs measured quickly with a caliper. These are not exact measurements.
    • Daniel W Lyles
      Do these rods come with the bolts that are pictured?
      1 Answer
      • Customer Service Rep
        Yes of course. Every photo on our website is of the actual product, and not of a generic photo. What you see in the photos is what you get.
    • Andrey
      What hp is good for it?
      1 Answer
      • Customer Service Rep
        K1 Does not specify a horsepower level, but this type of rod typically can easily handle 600-700 horsepower, maybe even more.
    Close