713-270-8520

Megan Coilover Suspension, 00-05 Neon / 03-05 Neon SRT-4

Read or Write Review

Model Number: 220312

FREE SHIPPING within the US!!!

MP now stocks Megan coilovers for the 00-05 Neon & 03-05 Neon SRT! Megan coilovers are a great value for the money and doesn't sacrifice quality. These are great coilovers for light duty.

Coilovers allow you to adjust the height of your vehicle while maintaining the suspension travel of your struts. This means that regardless of how much you lower your vehicle you wont have to worry about your struts blowing out. Furthermore, with the Megan coilovers you can adjust the dampening of the struts (compression and rebound).

These coilover units feature:

Front spring rate of 448 lbs, rear 336 lbs. This is a firm setting, designed for better handling with less sway.
Camber plates built in the front units. A $200 Value by themselves!
Full pillow ball upper mounts for front and rear
They are also slotted for camber for front and rear.
Come with a one year warranty!

$949.99

Additional Options

Prothane Shorter Rear Sway Bar End Link Set, 00-05 Neon/SRT-4

Model Number: 601303

We offer these Prothane shorter end links for those of you who have lowered your car. When you lower your vehicle, Read more

Megan Coilover Suspension, 00-05 Neon / 03-05 Neon SRT-4, Coilover Suspension: Store Name

Ask a Product Question

- *E-mail: (Required)
  *Name: (Required)
  
  Characters remaining: 500
  Our Q&A program is designed to educate our community.
  This is not to answer questions about your orders, or problems you are having with a part you ordered. If you have questions about a part you have already ordered, please contact us by email at info@modernperformance.com or call us 713-270-8520 for faster service.
zach

For the Megan coilovers do I need the rear camber plates? If so would your BC work cause I don't see Megan ones

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- Modern Performance
  
  You dont NEED rear camber plates, but they are useful if you are going to lower your car more than 1.5 inches. The BC rear camber plates do NOT work on the Megan coilovers.
Anonymous

Since the Megan coilovers don't come with camber plates on the rear coilovers, are the camber plates that I can buy that will fit?

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- customer service rep
  
  There are no rear camber plates available for the Megan coilovers.
Marco Lizarraga

Can I use camber bolts with these coilovers?

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- customer service rep
  
  These coilovers have slotted mounting bolts for the knuckles, which gives a few extra degrees of camber adjustment. We highly doubt you'd need camber bolts with these.
Jordon Rustad

Do these fit Neon SRT-4 ACR with the BBS wheels?

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- Customer Service Rep
  
  All coilovers we carry, will fit with ALL OEM wheels ever produced and installed on the 00-05 Neon and 03-05 Dodge SRT-4. You do not need to change wheels/tires to install coilovers. It only gets tricky if you start changing wheels with funky offsets, taller/wider tires.
Jesus

Does car have to be off ground to adjust the dampening ?

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- Customer Service Rep
  
  To adjust the dampening, you open the hood and trunk, and rotate the adjustment knobs.
  
  To adjust the height of the car, you'll need to remove the wheels, loosen the lock rings and adjust the sleeves. Its pretty straightforward.
Dustin A Todd

Are there any softer spring options for these coilovers?

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- Customer Service Rep
  
  As of 6/8/17 we do not offer any on our website. However, we have access to a lot of spring manufacturers and can get different spring rates for you. We generally do not want to change a spring rate that is more than 10% lower than the factory spring rate or else the struts wont be properly valved to the springs. Contact us to discuss options on this if you want to change springs.