If you have a 95-99 Neon with a 2.0L SOHC engine with a turbocharger, or super high compression, this is the manifold to get. We offer another manifold for 2.0 Sohc's that is a long runner type for non turbo use, this manifold is the short runner type.
This manifold will make a lot more power than your stock sohc manifold because it eliminates the sharp 90 degree bend under the throttle body. It also is thoroughly hand ported to smooth out the interior, maximizing air flow into the engine.
These are made out of RARE early 1995 Aluminum stock 2.0 manifolds (almost all 95-99 Neon sohc manifolds are plastic!) that are cut, and then welded to new lower aluminum manifolds. They can be used with stock throttle bodies however you really should use a ported stock, or a 60mm tb with this. You'll also need the longer 98/99 Neon throttle cable for this as well. The Mopar 98-99 longer throttle cables are discontinued so you'll need to buy a used one or find one in the junkyard.
Each manifold is pressure washed so they are totally clean of oil, debris, and the mating surface to the head is planed so its true and wont leak.
No tuning needed, bolt it on!
Map sensor location is on the back of the manifold
Other vacuum ports on back of manifold for your other vacuum needs. Either use a brass nipple from a hardware store, or block off unused ones.
Ready to install, just buy a new intake manifold gasket for a 95 SOHC, as these do not use the rubber O rings on the 96-99 SOHC's!
No core needed, buy this manifold outright!
AMM can take a LONG time to make these, this current batch took almost 1. 5 years from when we sent them to him for us to receive. So, its kind of a big deal for us to have these in stock. If you ever wanted to get one of these, and don't want to wait 1.5-2 years to get one done, this is your chance.
Select an option to add this to your cart.
