Injen Intercooler Pressure Piping, 2013-16 Dart 1.4L

Review star icon Review star icon Review star icon Review star icon Review star icon
Model Number: 226106

If you own a 2013-16 Dodge Dart 1.4L Turbo, and want to make more power, this bolt-on modification will provide good power & torque increases, and put a smile on your face! This pressure piping is available in either polished or black, and includes all the required hardware and photo installation instructions.

The stock pressure piping is made of plastic and has several unnecessary bends and angles. Not only does the Injen Intercooler Pressure Piping address this issue, but in doing so it is also shortens in overall length slightly. This allows the turbo to operate more efficiently, and spool much more quickly! (see below)


On the Dyno this pressure piping yielded a 7 HP and torque peak gain, and at redline a nearly 15 HP gain over stock. The higher you rev your engine, the more efficient this piping becomes in comparison to the stock plastic piping, providing more power and improving throttle response.

Note: Despite what Injen's packaging may say, this pressure piping kit is compatible with both manual and automatic transmissions.

$279.99
Injen Intercooler Pressure Piping, 2013-16 Dart 1.4L, Turbo Accessories: Store Name

Ask a Product Question

  • Alex
    What affect does this product have with the cars warrantee?
    1 Answer
    • Customer Service Rep

      Your car wont have any problems, or check engine lights with this set of intercooler piping. So, you can install this, and not have any problems at all. Most dealerships wouldnt even care if you installed these, and if you are concerned for any reason for when you're going in for warranty service, then you can take these off and switch back to the factory piping.
  • Allen
    What size are the pipes?
    1 Answer
    • Customer Service Rep

      The diameter changes depending on where you measure, but they are roughly 2.25 inch in diameter. TONS of development and testing were put into making a set of piping that made consistent power gains across the board and what you see now is what made the most power out of many different designs!
  • John
    Will this kit fit an Abarth?
    1 Answer
    • Customer Service Rep

      No, this is not interchangeable with the Fiat 500 Abarth, the intercooler piping and intercooler design are way different between the two vehicles.
  • garseeyuhh
    Will i be able to see the piping with the engine cover on?
    1 Answer
    • customer service rep

      You will be able to see a small amount of the piping under the cover but not much.
  • jeff
    will this injen set fit manual also, or just automatic please?
    1 Answer
    • customer service rep

      This piping set fits both the manual and automatic.
  • jeff
    sorry, also, will this fit 2014 rally e 1.4l turbo
    1 Answer
    • customer service rep

      These fit ALL 1.4 Turbo Darts made from 2013-2016.
  • ryan
    On your answer about the warranty you say the dealer shouldn't care about the install but that doesn't answer whether it voids the warranty for sure or not.
    1 Answer
    • customer service rep

      Wether or not this affects your warranty really depends on what part is having a problem. If you have a problem with your transmission, radio, suspension, electrical wiring, etc then you shouldn't have any issue at all. If
  • Ryan
    What is the avg. installation time and does the front bumper need to come off?
    1 Answer
    • customer service rep

      Most people with basic tools can install this kit in about 1.5-2 hours. You do not need to remove the bumper, you can simply remove the plastic under tray to access the piping better.
  • chris C
    so just to be clear this dose not come with the couplers to fit them together, just the holes clamps?
    1 Answer
    • customer service rep

      Correct, this kit comes as shown. Piping, and clamps. You reuse the factory rubber couplers.
  • Kadyn
    Do the intercooler piping come with the intercooler as well?
    1 Answer
    • Customer Service Rep

      This kit comes exactly as shown in the photos. Two pieces of piping, and clamps. This kit does not come with an intercooler. If you need a replacement intercooler you should talk to your local dealership or buy a used one off Ebay.
  • Jack
    I live in California, is there a CARB EO# for this product?
    1 Answer
    • Customer Service Rep

      As of 6/11/2019 this item does not have a CARB certification number for approved use in California. It is fine to use in the other 49 states of the USA.
  • Mike
    Does this piping kit come with the 90* rubber elbow coming off the back of the engine or do you have to reuse the stock piece? Mine is torn
    1 Answer
    • Customer Service Rep

      This kit is exactly as shown in the photos. There are no couplers because you reuse your stock couplers. If you need a replacement coupler, you may need to find one used, buy one from a dealership, or find an alternative coupler.
  • lonnie maynard
    will this kit work on 2016 jeep renegage 1.4 turbo?
    1 Answer
    • Customer Service Rep

      We've never heard of anyone using these on a 1.4 Turbo Renegade. Even though its the same engine used in the 1.4 Dart, the Renegade seems to sit higher, so most likely the piping is different.
  • Brian Vacek
    My Dart has already been pretty heavily modified when it comes to the motor, would I still see the same gains and benefits as a stock dart would with this?
    1 Answer
    • Customer Service Rep

      These pipes have smoother ends, shorter piping, so the engine responds faster and harder. It doesnt matter if your car is stock or heavily modified, there will be a noticeable improvement in changing your intercooler pressure piping to these pipes.
Close