DiabloSport inTune i3 Platinum Tuner, 03-05 Neon SRT-4 / 03-06 PT Cruiser GT

Review star icon Review star icon Review star icon Review star icon Review star icon
Model Number: 601143-I3

FREE FedEx Ground Shipping!!!

DiabloSport's inTune i3 Performance Programmer is an easy way to boost power and torque without even popping the hood! You get a performance that gives an additional 30 horsepower and 50 lbs of torque! Also, it makes your throttle more responsive, optimizes drivability, and improves fuel The inTune i3 programmer is pre-loaded with dyno-tested performance programs designed specifically for your ride. Within minutes, you could add horsepower and torque with no other tools required!

The Platinum i3 is designed for those who want the best of both worlds; pre-loaded, high-performance tunes in addition to custom tuning capability. The i3 Platinum is already equipped with some of the best tuning right out of the box but we know our customers like to bolt-on upgrades and extract every bit of horsepower out of their vehicles. That is where CMR custom tuning comes in. Our nationwide network of CMR custom tuning dealers can build tunes for your specific ride on a dyno or by using the built-in data logging features of the i3. Now you can have great tunes for now, and custom tunes for when you take your ride to the next level with the Platinum i3.

Multiple Vehicle Licenses

The inTune i3 can tune your whole driveway! With the i3's additional vehicle license options, you can tune multiple vehicles with one device. If your i3 is currently married to your Dodge Challenger, but you also want to tune your Ram, upgrade your i3 with an additional license through our Ignition Update Software and you can be tuning both vehicles in no time. The additional i3 licenses can program any make or model that the i3 supports.

inTune i3 Features:

  • New "Easy Tune" Mode for Simple Installation
  • Dyno Tested Performance Programs
  • Blazing Fast Vehicle Read/Write Times
  • Windows, Mac OSX and Linux Connectivity
  • OBD-II Data Logging
  • Read and Clear DTC
  • Purchase Multi-Vehicle Licenses
  • This tuner works on:

  • 2003-2005 Dodge SRT-4 Neon
  • 2003-2006 Chrysler PT Cruiser (GT MODEL ONLY)
  • Not foruse on pollution controlled vehicles in the state of California. Please see our other listing for the California edition.


    Additional Options

    3 Bar or 4 Bar MAP & TIP Sensor Conversion Kit, 03-05 Neon SRT-4 / 03-07 PT Cruiser GT

    Model Number: 220113-
    Are you running less than 22-23 psi of boost on the factory turbo of your 03-05 Neon SRT-4 or PT Turbo? If so, this Read more

    NGK Iridium Spark Plugs, 03-05 Neon SRT-4 / 03-07 PT Cruiser GT

    Model Number: 220143
    These spark plugs are the most popular, and best spark plug available for the Dodge SRT-4/PT Turbo. Why? Well, they Read more

    AGP Adjustable Wastegate Actuator, 03-05 Neon SRT-4

    Model Number: 220116
    Ever notice how your car always seems to drop boost from 5-6k rpms ? Have a boost controller, and notice how it doesn't Read more

    DiabloSport inTune i3 Platinum Tuner, 03-05 Neon SRT-4 / 03-06 PT Cruiser GT, Electronics: Store Name
    • John
      Does this tuner come in multi license automatically,or it needs to be purchased separately via diablo ?
      1 Answer
      • Customer Service Rep

        This unit comes with one license, to tune one vehicle. If you want to tune several vehicles with the same tuner, you will need to buy extra licenses from Diablosports website directly.
    • William
      What exactly does add map/tip package mean?
      1 Answer
      • Customer Service Rep

        The Neon SRT-4 uses pressure sensors to tell the PCM how much boost is in the system. There is a pressure sensor called a MAP sensor on the intake manifold, and another one called the TIP sensor bolted to the driver side fender. Once you start going above 21/22 psi, the factory sensors cannot accurately gauge the pressure, and so if you want to use a Diablosport custom tune that has high boost, say 23-30+ psi of boost, then you need our 3 bar MAP and TIP sensor package and you'll need to have the custom tune written so that it accepts the 3 bar sensors. If you are not running high boost like that, then you dont have to worry about all this and or buy the map and tip sensor package.
    • Tyler Keeling
      Does this work on 2008 pt cruiser turbo?
      1 Answer
      • Customer Service Rep

        No, this only works on 2003-2005 Dodge SRT-4's and 2003-2007 Chrysler PT/GT Cruiser turbo's.
    • John t
      How is this different than the I2? Also, will this have a 91 octane preset? I do not have 93 where I live. Also, will this run smoothly with your mpx 3"exhaust and Cai along with any other bolt ons? Thanks for the info.
      1 Answer
      • Customer Service Rep

        I2 is a discontinued older model. I3 is the new model that has a faster processor, stores more tunes, allows for licenses to be bought to flash multiple vehicles instead of only one car AND is a code reader to tell you why your check engine light is on.
    • Rob
      What are the exact tunes pre programmed on the i3 and how do they vary from the 20psi tune on the predator 2? I have a 03 srt neon on factory turbo with full bolt ons.
      1 Answer
      • Customer Service Rep

        All of the Diablosport products have the same tunes. The only difference is whether or not they allow you to make a custom tune (Predator 2 does not allow custom tunes, every other product does) and the screen (Trinity has screen to display your custom parameters, others do not).
    • Jacob Friberg
      Will I have to pay extra for an e85 tune for an 05 neon srt4. Or will that come with the tuner.
      1 Answer
      • Customer Service Rep

        As of 1/3/2019, these tuners only come with two tunes : 91 octane and 93 octane. There are no E85 fuel optimized tunes. You can do a custom E85 tune if after purchasing you contact a custom tuner, and pay to do a customized tune though.
    • Jason Bowen
      Are the boost levels adjustable with the I3 tuner on a 2007 PT GT 5 speed?
      1 Answer
      • Customer Service Rep

        Out of the box, this tuner has a optimized tune that will increase the boost to high teens, low 20's. This can not be modified unless you have a custom tune written by a Diablosport custom tuner.
    • Juan
      Hi, this might be a dumb question but I am new to all this tuning stuff. Once I tune the car do I have to leave it connected to the car once it says its installed, or can I just disconnect it and plug my AeroForce Gauges back ?
      1 Answer
      • Customer Service Rep

        Installation procedure for Diablosport:
        1) Plug Intune into your obd2 port under the dash.
        2) Turn on the ignition, follow the prompts on the Intune.
        3) The car will be flashed in about 5-10 minutes. Then turn car off.
        4) You are done. Put the Intune in your glove box.
    • Tyler
      I read the install procedure, when you say turn on the ignition. Do you mean start the vehical, or just leave the key in the on position. Also will this give me precise afr's or should I still install a gauge
      1 Answer
      • Customer Service Rep

        Turn the key until the tumbler is in the ON position but do not start the car. Do not worry so much about this, the Intune gives you step by step instructions on the screen when installing.

        Any time you are increasing boost pressures, you really should have an air/fuel mixture ratio gauge to make sure the car is running safely.