Hi, Ive heard from some mechanics near me that if I get a Wot box I will have to remove my catalytic Converter or the wot box will eventually cause it to fail.
Modern Performance
Jordan -correct, the WOT box when used in launch control mode dumps fuel and therefore with extended use can possibly damage a catalytic convertor.
Nicholas Ameiss
Hi, I am in the market for a WOT box for a chevy cruze. A few people have directed me to this page. I have a big turbo chevy cruze and i want to get a WOT box to help with spooling so i can do some serious drag racing. Would this WOT box work with the cruze? aswell as it being an automatic? Please let me know! Thanks!
Customer Service Rep
This is a universal item, it can be wired in any application. However we have never seen this done before on a Cruze. If there is an installation write up some where than you can give it a try.
Kevin s
Is there a plug & play wiring harness available for this 2-step/wot back for the cobalt ss supercharged?
Customer Service Rep
As of 7/12/18 there is only plug and play harness, and its for the 2003-2005 Neon SRT-4. There are no other plug and play harnesses made at this time. For all other cars, you will need to hard wire in the Wot Box into your car.
johnny
can set what rpm you want it to limit at or is it set to only 2600 rpms?
customer service rep
Currently this will only work on the 00-05 Neon and SRT-4, it will NOT work with 95-99 Neons. More information as far as installation goes is available on the manufacturers website - www.n2mb.com
val
Since this would ruin my catalytic converter, i was thinking about using a cutout instead when its on. Will that work? If yes, should i be worried about flames coming out of it possibly burning something underneath my car?
customer service rep
You can use a cut out, however it would have to be before the catalytic convertor to allow the exhaust gases to bypass the cat. If you are concerned about exhaust gases through the cutout, then use the turn down to angle the exhaust towards the ground.
Ty
Could you use this with an electronic boost controller without harm to engine or turbo?
customer service rep
You can use the N2MB box with a catted downpipe, however, because this cuts spark, unburnt fuel gets dumped, and that can ignite in the cat, which will reduce the life of the cat.
Patrick E Cruz
Can I run this with my Diablosport Trinity? They wont interfere with each other at all?
Customer Service Rep
Its designed for use with manual transmissions in mind.
You could use it on an automatic possibly, but it would require some custom work to wire it up as there is no clutch pedal switch on an automatic to trigger the WOT box. For now we'd only recommend manual transmission owners to install this.
Aaron
I have a 2004 maxima same engine as the 350z. Should the installation process be any different than the 350z? Basically splice your wire into the main ignition wire. And aswell, how long do you think I can last with factory pre cats I'm doing headers but I don't have them on yet
Customer Service Rep
Don't see your car listed in the application guide above? We have no further information, you could try contacting the manufacturer to see if they have any compatibility details.
Customer Service Rep
Don't see your car listed in the application guide above? We have no further information, you could try contacting the manufacturer to see if they have any compatibility details.
Customer Service Rep
Don't see your car listed in the application guide above? We have no further information, you could try contacting the manufacturer to see if they have any compatibility details.
Pablo A Arguello
Can i use the wot box on an automatic genesis coipe 2.0t
Customer Service Rep
Yes, your car is in the vehicle listing, and in regards to automatic, it will work but the no lift shifting will not work. This would just be used as a launch control device on any automatic car.
Customer Service Rep
This will work on all gas cars as long as you can figure out your wiring. It will work on all automatic transmission cars as well, except you will not have the no lift shift option, you'll just have the launch control.
chance
so if i buy this and the plug n play harness, i can install this with no cutting and splicing?
Customer Service Rep
Yes, exactly like we mention on the N2mb Wot Box plug and play harness page, if you use the Wot Box and the Wot Box PNP harness for the Neon SRT-4 its a plug and play, no cutting install. For all other vehicles, because no other PNP harness has been made, you'll need to cut, splice wires to get the Wot Box insalled.
Customer Service Rep
The boost box is a boost control device for the 2003-2005 Dodge SRT-4 made by N2MB, the same manufacturer of the Wot box. If you have a SRT-4 Neon, you can read up more on the boost box by entering part number 220242 in the search bar.
Luke
I noticed that Mini Coopers weren't listed on the frequently used makes. Would this still work for a Mini as far as the wiring and programming goes?
Customer Service Rep
This will work on all gas cars as long as you can figure out your wiring. It will work on all automatic transmission cars as well, except you will not have the no lift shift option, you'll just have the launch control.
Customer Service Rep
This will work on all gas cars as long as you can figure out your wiring. It will work on all automatic transmission cars as well, except you will not have the no lift shift option, you'll just have the launch control.
Nash
Can this be installed on a naturally aspirated Fiat 500 pop?
Customer Service Rep
This will work on all gas cars as long as you can figure out your wiring. It will work on all automatic transmission cars as well, except you will not have the no lift shift option, you'll just have the launch control.
Kamana
I have a 2013 BMW 535i with the N55 engine will the WOT Box work for my car? I didn't see it listed but the engine is very similar to the N54
Customer Service Rep
This will work on all gas cars as long as you can figure out your wiring. It will work on all automatic transmission cars as well, except you will not have the no lift shift option, you'll just have the launch control.
Zachary Galvan
Is the wiring the same for a automatic as a manual
Customer Service Rep
There is only one model of WOT box/2 step ever made. It fits automatics and manuals, and works with every fuel injected car ever made.
Customer Service Rep
This will work on all gas cars as long as you can figure out your wiring. It will work on all automatic transmission cars as well, except you will not have the no lift shift option, you'll just have the launch control.