Progress Adjustable Rear Sway Bar, 2013-16 Dart

Review star icon Review star icon Review star icon Review star icon Review star icon
Model Number: 226346

The Progress Adjustable Sway Bar for the 2013-16 Dodge Dart! So you have upgraded the wheels and tires, and now the traction has increased. More traction means more body roll, and the 'leaning' during cornering follows suit. The fix is simple! Bolt-on a Progress rear adjustable sway bar, and tame that unnerving body 'lean' while cornering. Now enthusiasts can sport-tune their 2013-16 Dodge Dart for improved handling with an upgraded Progress rear Anti-sway bar.

This bolt-on suspension component will minimize the uncomfortable body 'roll' during sport driving, and reduce understeer or 'plowing' during cornering. This rear sway bar replaces the OEM 14 or 15mm bar with a larger 19mm diameter alloy steel anti-sway bar and new polyurethane bushings. The end of the sway bar has two adjustment locations, so you can fine-tune the roll stiffness. The replacement polyurethane bushings are firmer than the OEM rubber units, so the new bar responds faster to cornering inputs. This Progress sway bar upgrade will also improve highway tracking and speeds up the steering response. The kit is complete, including synthetic chassis grease & installation instructions.

-Less body roll means more traction, faster cornering speeds, and increased driver confidence. -Polyurethane bushings produce crisp response on turn-in. -Progress Anti-sway bars are cold-formed in-house using our custom-built precision bending equipment. Both laser-cut and CNC bar ends are MIG welded in place using a precise fixture for an exact fit.

  • Rear Anti-sway bar rates:
  • OEM 14mm diameter 53 #/inch
  • OEM 15mm diameter 70 #/inch
  • Progress 19mm (soft setting) 160 #/inch
  • Progress 19mm (firm setting) 209 #/inch
  • Size: 19mm
  • Adjustment Range: 2 hole
  • Reuse your factory endlinks.

    All sway bars are powdercoated metallic gray with one year limited warranty.

    The anti sway bar clamshell mount nuts are rated at 46 ft lbs for tightening down.
    The sway bar link nuts are rated at 41 ft lbs.

  • Ask a Product Question

    • Joe
      As shown above... Does this sway bar include the rear bushings?
      1 Answer
      • Customer Service Rep

        Yes, the frame mounting bushings and brackets shown in the photo come with this kit.
    • victor gonzalez
      Would you need an alignment after placing the new set up?
      1 Answer
      • Customer Service Rep

        No, you will not need an alignment after installing a swaybar, or strut bar. Alignments are only needed when you remove and or reinstall struts, and or loosening the knuckle bolts.
    • Brian
      This states that not all sway bars are powdercoated gray. Do they have any coating at all or are they raw steel??
      1 Answer
      • Customer Service Rep

        All Progress bars are powdercoated in gray.
    • Nick Neibauer
      Does this come with rear end links
      2 Answers
      • Customer Service Rep

        It comes with everything shown in the photos. The photos are of the actual product. Also in the details near bottom of the product page it mentions that you reuse your factory endlinks.
      • Customer Service Rep

        If you ever have any doubts about a part at MP, just look at the photos. We always take our own photos, so you are looking at the actual part you'd receive. There is no endlink in the photos, furthermore the product text near the bottom states : reuse your factory endlinks.
    • Zack
      Which holes are for the firm and soft setting? thanks!
      1 Answer
      • Customer Service Rep

        In the photo showing the factory swaybar and the Progress bar, the part of the swaybar that is shaped like a J with the endlink mounting holes is called a moment arm. The further away the mounting hole is from the bend near the swaybar mounting bushing is, the softer it is. The closer the hole is on the moment arm to the center of the bar, the more firm it is.
    • Michael
      Other than the end links, is anything else need to add this to 2016 SE?
      1 Answer
      • Customer Service Rep

        If your Dart already has a rear swaybar, then you just replace your OEM swaybar with this one and the frame mount bushings and reuse your factory endlinks. If you do not have a rear swaybar, then you will need to buy new OEM or factory style endlinks.
    Close