713-270-8520

Mopar OEM Pressure Pipe Temperature Sensor, Neon SRT-4 / Caliber SRT-4 / PT Cruiser Turbo

Read or Write Review

Model Number: 220273

We carry the Mopar OEM Temperature Sensor. This particular sensor is used in several vehicles as the temperature sensor in the air intake box, however in the 03-05 Neon SRT-4 it is the sensor between the throttle body and the intercooler on the factory plastic and rubber piping.

This will fit the following vehicles:

03-05 Neon SRT-4 (used in the pressure pipe between intercooler and throttle body)
01-10 PT Cruiser (turbo or non turbo)
08-09 Caliber SRT-4 (used in the air intake before throttle body)

NOTE 1 This does not come with the rubber grommet!!!

NOTE 2 For the Neon SRT4, this only works with the factory piping between intercooler and throttle body. If you have an aluminum aftermarket pipe, this will only work if you have a push type grommet type fitting. If you have a screw in style sensor and aluminum piping you will need the AGP replacement temperature sensor kit!

$69.99

Additional Options

IAT Sensor Wiring & Connector, 00-05 Neon / 01-10 PT Cruiser / 07-12 Caliber

Model Number: 701162

We now stock the Kinnettic Kreations IAT (ambient intake air temperature) sensor connector wiring kit. This comes with Read more

Mopar OEM Pressure Pipe Temperature Sensor, Neon SRT-4 / Caliber SRT-4 / PT Cruiser Turbo, Blow Off Valves & Adapters: Store Name

Ask a Product Question

- *E-mail: (Required)
  *Name: (Required)
  
  Characters remaining: 500
  Our Q&A program is designed to educate our community.
  This is not to answer questions about your orders, or problems you are having with a part you ordered. If you have questions about a part you have already ordered, please contact us by email at info@modernperformance.com or call us 713-270-8520 for faster service.
Richard banks

Does code p0073 come up if this sensor is not in?

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- Customer Service Rep
  
  Yes, most likely if your sensor wiring is either damaged, or if the sensor is unplugged, or faulty you'd have a P0073 code.
Mike burgess

Does this sensor come with the rubber gromet?

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- Customer Service Rep
  
  No, just as shown in the product photos, this is just the sensor. That grommet is part of the piping that goes between the throttle body and intercooler and its not sold separately by Mopar.
Travis Buie

What size is the rubber grommet and what would I have to purchase to get it or where would I get it? I have hard pipes already but the grommet is worn out and keeps blowing out.

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- Customer Service Rep
  
  We don't have any measurements of the grommet. The last time we had problems with the rubber grommet we took the upper hard pipe and sensor into a hardware store, found a grommet and cemented it in place. Or, better yet, just get rid of the troublesome factory pressure sensor grommet altogether with a AGP uppipe that has a threaded temp sensor and never deal with blowing out sensors again.
Britten Ogaard

Do you guys not carry these sensors in the upgraded thread in ones anymore?

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- Customer Service Rep
  
  This is the OEM pressure pipe sensor for use in the OEM pressure pipe. It sounds like you are looking for the AGP upper hard pipe pressure sensor - part number 220221-SENSOR-v2.