Mopar Idle Air Control (IAC) Wiring & Connector Repair Kit

Model Number: 220232

*NOTICE* BEFORE BUYING THIS KIT, OR THE TPS KIT, WE RECOMMEND YOU TEST YOUR CAR BY LETTING YOUR CAR IDLE WITH THE HOOD OPEN, AND JIGGLING THE WIRES GOING TO EITHER THE IAC WIRING. IF WHEN THE WIRING IS JIGGLED MAKES A CHANGE IN YOUR IDLE THEN REPLACE THE WIRING!

Have you ever noticed your 03-05 Dodge SRT-4 having a erratic idle?

The stock IAC wiring that attaches onto the throttle body has been known to have problems due to wiring from the factory that is bent at a sharp angle. This causes the wiring inside the connector to go bad, and or, frequently causes the wiring itself to break, while the plastic shielding is STILL in place!!

Mopar has released this IAC wiring kit, to repair the wiring. It comes with new, longer wiring, and the connector for you to repair the wiring yourself.

In order to complete this repair, you'll need wire strippers, a lighter to seal the heat shrinking.

$36.35

Ask a Product Question

  • John
    Will this work for the ambient intake temp sensor?
    1 Answer
    • Customer Service Rep

      This plug is similar to the air intake temp sensor plug, however it is not interchangeable due to the plastic plugs being slightly different.
Close