Mopar 3 Bar MAP & TIP Sensor & Adapter Package, 03-05 Neon SRT-4 / 03-07 PT Cruiser GT

Review star icon Review star icon Review star icon Review star icon Review star icon
Model Number: 220113-TWOMAPKIT

Are you running less than 20 psi of boost on the factory turbo of your 03-05 Neon SRT-4? If so, this product is not for you!

If you're interested in getting 3 Bar MAP & TIP Sensors for your high boost 03-05 Neon SRT4, or you're using a DSP or SCT to tune your car, this package is for you! It includes two (2) 3 Bar Map Sensors and one (1) aluminum MAP Sensor Adapter. One sensor will replace your factory MAP sensor, and the other will be used as a TIP sensor. As of 10/12/17 we are shipping this kit with a plug and play TIP Sensor that we have modified so that you don't have to find vacuum reducers and hoses for.

Note: These sensors are only plug-n-play for Neon SRT-4s equipped with a Mopar Stage 2/3 PCM. For all other Neon SRT-4s, you must have a MAP Sensor rescale done by a custom tuner. This is because the factory PCM expects input from a factory sensor, not a 3 Bar Sensor. If you install a 3 Bar Sensor on your SRT-4 without either a stage 2/3 PCM, or a rescaled PCM, it will not run correctly.

As of August 2009, Mopar no longer offers the 3 Bar MAP Sensor used with the Neon SRT-4 Stage 2 & Stage 3 kits. To fill this need, we have identified another Mopar 3 Bar MAP Sensor that can be used in its place. In order to accommodate the angle of this new sensor, an aluminum adapter is used to allow the sensor to be mounted to the 03-05 Neon SRT-4 intake manifold. The adapter has a threaded male port with rubber o-ring to seal tightly to the intake manifold, and it's held securely in place with allen head screws.

The primary reason this adapter was designed was not only to make it easier to install, but to keep the wiring from having to be cut and extended. If the factory wiring is cut, the voltage output from the sensor will be modified, and could create incorrect readings from the MAP sensor to the PCM.

  • Nick
    Im running a 60 trim and the previous owner removed the tip sensor and im peaking around 15psi of boost. If I get a tuner and trying to aim for 20psi or more do I need to get the 3bar tip?
    1 Answer
    • Customer Service Rep

      If you want to tune your car with a Diablosport/SCT, etc tuner, you absolutely need the map and tip sensors installed. If you run less than 20-22 psi, you can use the stock sensors. If you are running over 20-22 psi, then you will need these 3 bar sensors in this kit.
  • Daniel
    How do you modify tge sensor for it to work as a 3 bar tip?
    1 Answer
    • customer service rep

      You would use these in conjunction with either a Diablosport tuner, or a SCT tuner to flash your pcm. You would need to consult with a Diablosport custom tuner that would write a custom program for you to use the 3 bar map sensors.
  • Daniel
    This does not answer my question...... you guys state that the map sensor will be used as a 3 bar tip with minor modifications. ... what "minor modifications" will I need to do?
    1 Answer
    • customer service rep

      The 3 bar sensor that we offer has a 8-9mm inlet, and the tip sensor line has a 6mm size rubber boot. You will need to find and use a reducer to go from the 9mm to 6mm step down from the sensor to the tip line.
  • Benjamin webb
    Will these work with the staged ecm's? I have a mopar stage 2 ecm.
    1 Answer
    • customer service rep

      Yes, will work perfectly as the stage 2/3 pcms are calibrated for 3 bar map/tip sensors.
  • Michael
    I'm current stock turbo with full bolt ons and a diablosport tuner running 22psi. Will this be at all beneficial to me?
    1 Answer
    • customer service rep

      We do not recommend anyone with a stock turbo to change their map/tip sensors unless you are doing a custom Diablosport tune, and your tuner requires you to change the map/tip sensors.
  • Tom
    Should I use 3 bar map and tip sensors if I'm running a 50 trim
    1 Answer
    • Customer Service Rep

      If you are under 20 psi, no. If you are over 20 psi or planning on it, then yes. You'll need a Diablosport, and a Diablosport rescale tune for the map/tip sensors. Any good Diablosport custom tuner can easily do the rescale tune for you.
  • Austin
    Will this work with an e85 conversion
    1 Answer
    • Customer Service Rep

      Yes.
  • Darren
    Does the modded tip mount on the stock bracket under the driver fender?
    1 Answer
    • Customer Service Rep

      This TIP sensor will not clip on the TIP bracket like oem. You'll need to find a way to secure it to the bracket. Zip ties most likely.
Close