Plug and Play Fuel Pump Rewire Harness, 95-05 Neon / 01-10 PT Cruiser

Review star icon Review star icon Review star icon Review star icon Review star icon
Model Number: 701150

We now carry the Kinnettic Kreations Plug-and-Play Fuel Pump Rewire Harness for the 95-05 Neon (including Neon SRT-4), and 01-10 PT Cruiser (including PT Cruiser GT).

This harness plugs into fuel pump connector on the factory wiring harness and the factory fuel pump connector on the canister. 10-gauge power wiring runs to the alternator and relay, which is controlled by a stock relay via the fuel pump connector.

It is ideal for aftermarket fuel pumps, or applications where the fuel pressure is turned up on the stock pump, causing higher current demands. The harness includes a 30-Amp fuse in sealed fuse box, and is ready to go. No splices, cuts, crimps, or soldering required for installation!


Additional Options

Walbro 255 LPH Fuel Pump w Install Kit, 95-05 Neon/SRT-4

Model Number: 221260
If you want more horsepower, and a more consistent fuel delivery, then this is the part you need. The Walbro 255 liter Read more

Plug and Play Fuel Pump Rewire Harness, 95-05 Neon / 01-10 PT Cruiser, Fuel System: Store Name

Ask a Product Question

  • michael
    Let's say I didn't want to run a spoolboy mod and used this with the walbro 255 and a 58psi regulator will this help increase my fuel output
    1 Answer
    • Customer Service Rep

      This kit increases the voltage going to the fuel pump from about 12-13 volts to about 15-16 volts. This in turn increases the fuel pump output. This is ideal for people that want to increase the max output of their injectors and not have to buy larger injectors, or for anyone wanting to increase output regardless of size of injectors.
  • josias labanino
    hi, i want to know if you have to install the power wire to the alternator or can you connect it directly to the battery cause for my car i relocated the battery to the trunk and i find it easier to connect it there and not have to run it all the way under the car.
    1 Answer
    • Customer Service Rep

      The output from the alternator is much higher than from the battery, that's why this rewire goes from the alternator to the fuel pump. There would be no point in you going from the battery as that would be just about the same voltage output you have now going to your fuel pump. The point of this kit is to get higher voltage from alternator, therefore putting out more volume of fuel to your motor.
  • Nick
    I just purchased a TBE exhaust and i3 intune from you guys. Thanks by the way for that lol. Would this have any added benefit if i just plan to run the diablo performance tune preloaded on the i3?
    1 Answer
    • Customer Service Rep

      If you want additional fuel, the fuel pump rewire will increase the voltage, and increase the fuel output from the pump. If you are using a Diablosport, and are running lean, or want extra fuel this would be good.
  • Nathan
    Is this something you would have to drop the fuel tank for or can you get to the connections while keeping the gas tank in place?
    1 Answer
    • Customer Service Rep

      No, the fuel pump does not need to be removed to install this. You can install everything underneath the car, this is all plug and play except for the one terminal that needs to be connected to the alternator. Oh, and securing the harness with zip ties.
  • JuanGomez
    Does this replace the original wiring from he fuse box or does it add to it ?
    1 Answer
    • Customer Service Rep

      This kit is designed to run wiring from the alternator to the fuel pump and bypass the oem fuel pump wiring. You can leave your OEM fuel pump wiring in place and use this kit.
  • Deyvid Gutierrez
    Will this work if I'm going to use external Bosch 044 pump
    1 Answer
    • Customer Service Rep

      The benefit of this rewire harness is that it has the OEM plug and play connectors. This makes it super easy to connect to the oem wiring and to the fuel pump assembly. If you have an external fuel pump, you could use this, but you'd have to cut off the connectors and hardwire it to your external pump.