BC Coilover Rear Camber Plates, 00-05 Neon / 03-05 Neon SRT-4

Model Number: 220311-REARPLATES

For those of you who have the regular model of BC coilovers without rear camber plates installed on your 00-05 Dodge Neon or 03-05 Neon SRT-4, these will allow you to adjust the rear suspension for camber as well, whether you'd like additional negative camber,or additional positive camber. These camber plates are the exact same as the rear camber plates that come on the BC coilovers with front and rear camber plates.

Its very easy to adjust the camber with these, just loosen four allen keys, move the strut assembly to your camber preference and then tighten it down!

Note: These will not work on any other brand of coilover. These ONLY work on BC coilovers.

Ask a Product Question

  • chris
    HI! i was wondering since idont have any coilovers on my car 00 neon, could i fit the rear camber plates to my stock shocks ? ..im lowered on apex springs thanks!!
    2 Answers
    • Modern Performance

      No, the rear camber plates will only work with the BC coilovers, nothing else.
    • Jeremyk

      The stock springs' diameter is much greater than the coilovers and will not seat in the top mount properly.
  • Brent
    Are these needed for aligning the car after adding coilovers?
    1 Answer
    • Customer Service Rep

      Once you lower the 00-05 Neon and SRT-4 more than about 2 inches you need these to allow for further camber adjustment to bring the suspension back into alignment.
  • Cristian
    Hey I wanted to know if the camber plate will fit D2 coil overs? & if they don't do you know which camber plate I could use? Thanks
    1 Answer
    • customer service rep

      No, these will not fit other brands of coilovers that we know of because each manufacturer uses different size strut shafts. If D2 doesnt offer rear camber plates your best option is to sell them, and get the BC coilovers with the rear camber plates!
  • Allan
    Hi, I was wondering if these are a direct fit to my '05 Srt-4 with BC coilovers? Any drilling holes to mount into car?
    1 Answer
    • customer service rep

      If you already have BC coilovers without rear camber plates, this listing for rear camber plates is made exactly for you. There is no modifications you need to do to your car, simply undo the rear coilovers, remove the top hats and replace with the rear camber plates, and reinstall!
  • Jay
    I was wondering if i have to completely remove my rear coilovers to install these camber plates? Thanks.
    1 Answer
    • customer service rep

      Yes you would need to remove the coilovers from the car in order to install the rear camber plates. But, its not difficult to do, 2 bolts at the hub, remove brake line, remove bolts from top and its off the car.
  • bennie
    Will these camber plates work for the bc coilovers on the 95-99 dodge neon?
    1 Answer
    • Customer Service Rep

      No, these camber plates wont work on the 95-99 Neon. The first gen Neon has a different bolt pattern and bolt spacing.
  • Greg
    What is the +- degree range for these plates?
    1 Answer
    • Customer Service Rep

      There is no published information from BC on how much additional camber adjustment these give. The markings on the top have 7 notches either way, or a total of 14 positions. That doesn't necessarily mean + or - 7 degrees of camber adjustment, but it could be as its a wide range.
  • david
    Will these work with the inverted bc coilover
    1 Answer
    • Customer Service Rep

      Yes, these adjustable rear camber plates are for use with ALL of the BC coilovers for the 2003-2005 Dodge SRT-4. (BR models which is the standard coilover, RM which is the inverted coilovers, etc)
Close