713-270-8520

AGP Solid Engine Mounts, 00-05 Neon/SRT-4/ 01-10 PT Cruiser

Read or Write Review

Model Number: 220142

Upgrade to the AGP Solid Engine Mounts to significantly reduce wheel hop. We strongly recommend these mounts for anyone with a modified Neon SRT-4, as they will improve drivability, and help reduce quarter mile times.

This listing includes both the upper and lower engine mounts, as well as the washers for the top and bottom.

The AGP Solid Engine Mounts fit the following applications:

00-05 Neon
03-05 Neon SRT-4
01-10 PT Cruiser
03-07 PT Cruiser GT

Please note: there are two things you must do to make sure the upper mount works well with your car. Please see our last photo in the photo gallery. 1) Please take the two bolt cast iron bracket off the car. Youll notice one side is completely smooth, and the other side has some raised ridges. Please flip the cast iron bracket 180 degrees so that the motor mount will install with the smooth side. 2) Please DO NOT FORGET to install the large washer that AGP includes. We have way more people than we would like contact us and say their bushing fell out with the bolt still attached, all because they did not install the washer to secure the whole mount in place.

$145.00

Additional Options

MPx High Strength Motor Mount Bolt ZINC Plated Kit 03-05 Dodge SRT-4/PT Turbo

Model Number: 220147-ZNKT

Our high strength motor mount bolt kit uses the highest strength bolts available to prevent broken motor mount bolts. Read more

MPx High Strength Engine Mount Bolt Set, 03-05 Neon SRT-4

Model Number: 220147

Are you tired of bending/breaking your stock engine mount bolts? Do you plan on switching to a solid engine mount set? Read more

AGP Solid Engine Mounts, 00-05 Neon/SRT-4/ 01-10 PT Cruiser, Engine Mounts: Store Name

Ask a Product Question

- *E-mail: (Required)
  *Name: (Required)
  
  Characters remaining: 500
  Our Q&A program is designed to educate our community.
  This is not to answer questions about your orders, or problems you are having with a part you ordered. If you have questions about a part you have already ordered, please contact us by email at info@modernperformance.com or call us 713-270-8520 for faster service.
dustin

Will these work for a second gen neon 2.4L N/A swap?

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- Modern Performance
  
  Yes, these fit both the 00-05 Neon, as well as the 03-05 SRT4.
Greg Gray

I have bought the AGPdog bone motor mounts about 2 years ago now my engine sits about 3 to 4 inches to low on the pass. side . its so bad that now my axles are hitting the bottom of my alternator. what would you recommend. If I have to buy new ones I will not be very happy !!!!!

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- Modern Performance
  
  It sounds like your center mount in the frame on the passenger side is completely destroyed. The motor sinking has nothing to do with these engine mounts as these do not hold the engine up, they only hold the engine in place. We offer a replacement center mount, search for it in our search bar.
Daniel Rodriguez

Can I use the stock bolts? I dont have any mods but Im tired of buying the stock mounts that dont last nothing...

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- Customer Service Rep
  
  We would recommend you not use stock bolts, as they will break more easily than our hardened MPx bolt kit. You could use factory bolts if you never push your car or drive very aggresively, but the bolts are inexpensive, just buy the bolts so you dont have to worry about a bolt breaking.
Martin

Are the bolts included or do the stock ones fit?

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- Customer Service Rep
  
  You can use your stock bolts with these mounts, or you can use the MPx motor mount bolt upgrade kit. Your choice.
Deejay

Im having problems finding a socket that will fit the lower motor mounts on my 2004 dodge neon sxt, can you help me please???

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- customer service rep
  
  All of the oem bolts for the motor mounts are either 15mm, 18mm, or 21mm.