Mopar Performance Adjustable REAR Control Arms, 95-05 Neon / Neon SRT-4

Read or Write Review

Model Number: 220309

Mopar Performance rear adjustable control arms for the 1995-2005 Dodge Neon and Dodge Neon SRT-4. This listing is for a PAIR of control arms, or one per side for additional Toe adjustment. If you want to replace the four rear control arms in the rear of your Neon or Neon SRT-4 then you should buy TWO pairs of these.

Mopar designed this piece for those of you who want ADDITIONAL toe adjustment for road racing, and auto crossing.

These arms feature all steel construction with rubber bushings and washers.

$124.99

Mopar Performance Adjustable REAR Control Arms, 95-05 Neon / Neon SRT-4, Control Arms & Camber Kits: Store Name

Ask a Product Question

- *E-mail: (Required)
  *Name: (Required)
  
  Characters remaining: 500
  Our Q&A program is designed to educate our community.
  This is not to answer questions about your orders, or problems you are having with a part you ordered. If you have questions about a part you have already ordered, please contact us by email at info@modernperformance.com or call us 713-270-8520 for faster service.
Jake

What is the material, diameter, and wall thickness?

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- Modern Performance
  
  The rear control arms range from .75 to 1 inch in diameter depending on if you are at the adjustment part of the arms or the rod. They use a rubber bushing with steel inner sleeve. There are no published measurements of the thickness of the bar.
Rick

Do these come with rubber or poly?

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- Modern Performance
  
  These come with rubber bushings installed.
Jesse

In order to adjust the Toe does this replace the front or rear bar for the rear tires?

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- Modern Performance
  
  This only adjusts the rear toe.
Warren

Will these fit on 2001 neon?

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- Modern Performance
  
  Yes, they will fit all 00-05 Neons, and Neon SRT4's.
Sergio Arias

My Car Is Lowerd 2" In The Rear And The Wheels Are Toed In. Will This Fix My Problem..

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- 220120
  
  Your wheels are not toed in, they are cambered in and you need camber bolts, or an alignment, or both.
sean

When ordering these control arms, do they come with new bolts and nuts?

0 Answers
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
Kendra

Does this come with the hardware. Nuts and bolts?

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- Customer Service Rep
  
  No bolts, no nuts. You reuse your hardware. Please see photos.
Ruben Perez

Are these a direct oem replacement? Or do they have a higher performance level than factory RCA?

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- Customer Service Rep
  
  These are a direct oem replacement. We do not have any further information from Mopar other than these being adjustable for toe adjustment. Its possible these could have a more firmer rubber for the bushings but there is nothing that says that for sure.
Chance

If i get TWO PAIRS, one pair for each side. Would i not be able to adjust my Camber and Toe? And if so to what extent of camber adjustment would there be? like maybe up to 3.5 degrees ?

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- Customer Service Rep
  
  These ONLY allow for toe adjustment. You adjust camber with camber bolts that bolt the strut to the knuckle. The Mopar adjustable rear control arms have nothing to do with camber adjustment.
Josh

Are these control arms packaged/branded as genuine Mopar Performance parts?

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- Customer Service Rep
  
  We get these directly from Chrysler, and they come in a box with a Mopar part number. That's why they are labeled as Mopar Performance control arms.
Chance

How much toe adjustment do the stock RLCA have?

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- Customer Service Rep
  
  This kit is for one pair, or two arms. If you use one arm on one wheel, you'll get + or - 1.5 degrees extra adjustment. If you use two arms per wheel, you can get plus or minus up to 3 degrees extra adjustment.
Jesus Soto

3 additional degrees for negative or positive

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- Customer Service Rep
  
  These give UP TO AN ADDITIONAL 3 degrees of negative or positive adjustment. Use one pair of arms for up to 1.5 degrees negative or positive, and use two pairs for up to 3 degrees negative or positive adjustment.