MSD Coil Pack 95-2010 Neon/SRT-4/PT/GT Cruiser
+ ENLARGE IMAGE
Email iconEmail a Friend

MSD Coil Pack 95-2010 Neon/SRT-4/PT/GT Cruiser

Review star icon Review star icon Review star icon Review star icon Review star icon
Read or Write Review
Model Number: 221126
NOTICE: This part listing is for 96-05 Neon, 00-10 PT Cruiser, and 03-07 GT Cruiser with flat terminals. If your vehicle has round terminals, you must splice in a flat pin pigtail, or purchase the round pin Granatelli Ignition Coil Pack.

Coil packs can occasionally go bad on Neons, and you will sometimes notice a misfire, or at worst your car will run on two cylinders. We recommend you replace your coil pack if your car has upwards of 80-100k, and while your at it, we recommend replacing the spark plug wires

95 -96.4 use rounded plugs, 96.5-2005 use flat plugs. If you have a 96, or if your not sure what year your wiring harness is from, then YOU need to check the wiring before ordering. Late 96, and 97 and Newer

95 and early 96

$95.00
MSD Coil Pack 95-2010 Neon/SRT-4/PT/GT Cruiser, Ignition & Electrical: Store Name
  • Ryan
    Is this better than the Granantelli?? Would u recommend this over the Granantelli??
    1 Answer
    • customer service rep
      Both the MSD & Granatelli Coil Packs are good quality pieces. We experienced some quality issues with the MSD coil packs way back in 2014, but have had good luck with both manufacturers since that time. You really can't go wrong either way, so it simply comes down to a matter of preference on the color.
  • Ryan
    Will this work for a 2004 Neon Srt-4?? Kinda a dumb question but figured I would ask. Thanks.
    1 Answer
    • customer service rep
      Yes, this coil pack works on all 96.5 - 2005 Neon and Neon SRT4's.
  • Aaron
    Do i need to upgrade plug wires when going to this coil pack?
    1 Answer
    • customer service rep
      No, you can interchange stock wires, aftermarket wires with this coil pack and no changes are required. However, its a good time to consider changing your spark plugs, and or wires if its needed.
  • Fernando
    Is this coil pack plug and play with no need to modify anything
    1 Answer
    • Customer Service Rep
      Yes, this coil pack and every other coil pack we offer, you unbolt it, unplug the factory wiring, replace the coil pack and you are done. Couldn't be any easier installation wise.
Close