CBD Carbon Fiber Injector Cover, 03-05 Neon SRT-4

Review star icon Review star icon Review star icon Review star icon Review star icon
Model Number: 220748

For underhood dress up pieces, nothing catches your eye quicker than a glossy carbon fiber fuel injector cover! This item has the exact same dimensions as the factory one, except its made in carbon fiber. Please note you will need to swap out the rubber grommets on the bottom from your old injector cover to the new one so that this will secure onto the injector cover attachment points.

This cover has SRT-4 embossed on it, just like the stock one! If you want it to be more noticeable you can paint the letters red.

CBD Carbon Fiber Injector Cover, 03-05 Neon SRT-4, Engine Dress-Up: Store Name

Ask a Product Question

  • Ben
    Can it be painted? For example if we wanted the "srt 4" to pop out?
    1 Answer
    • Modern Performance

      Sure! There is no problem in painting this.
  • Brady Spears
    I would like to paint the 'SRT-4' letters red, but what kinda paint should I use?
    1 Answer
    • Customer Service Rep

      Most likely you'd want to use an oil based paint. You'd want to get some blue painters tape to tape off the areas you don't want painted and carefully tape it off.
    Does the engine heat degrade the carbon fiber clear/gel coat quickly?
    1 Answer
    • Customer Service Rep

      No, not at all. We've seen these installed on customers cars for years with no issue. The worst case scenario is that the clear coat would turn yellow, and you'd have someone sand it down and then re-clear coat it. But that's probably 3-5 years down after installation.
  • Aaron Lester
    I am missing my factory cover and like this replacement. Problem is the grommets have to be transferred over from the factory cover and like I said I have no factory cover. Mopar has never serviced the grommets and no longer the cover. Any ideas of a supplier for these.
    1 Answer
    • Customer Service Rep

      We do not currently offer any grommets, nor can we recommend any. We are sure with some searching you can find some, you'll just need the rough measurements for outside diameter and inside diameter.