Autometer Mechanical Boost Gauge (-30/+30), Silver
+ ENLARGE IMAGE
Email iconEmail a Friend

Autometer Mechanical Boost Gauge (-30/+30), Silver

Review star icon Review star icon Review star icon Review star icon Review star icon
Read or Write Review
Model Number: 601623-ULTRALITE

This Autometer gauge shows a full 30 vacuum to 30 psi of boost.

Whether it's to upgrade or replace a malfunctioning gauge this 30/30 gauge will fit almost everyone's needs. Includes hardware for a basic install.

$86.99
Autometer Mechanical Boost Gauge (-30/+30), Silver, Boost Gauges: Store Name

Ask a Product Question
  • David Ness
    Curious where you use the T fitting to tab into your vacuum line on a 2010 Cobalt Turbo.
    1 Answer
    • Modern Performance
      You would have to use the the new lines in the box and wiring, also you would have to T into the intake manifold.
  • james dhaliwal
    Will this fit in the stock frame
    1 Answer
    • customer service rep
      We're not sure what you mean by a stock frame, but the primary reason we carry this is for customers that have 03-05 Dodge SRT4's that want to replace their 20/20 boost gauge with a higher boost gauge. If you have a 03-05 Dodge SRT4, then yes, its a perfect replacement.
  • Wm.Mccormick
    Will this gauge fit in the stock location on a 2005 SRT 4 ? Does anyone know how to remove the factory gauge ? Thanks..
    1 Answer
    • customer service rep
      Yes, it will fit in the stock boost gauge pod. The whole reason we carry this, is to fit into the stock gauge pod in the 03-05 Neon SRT4. To remove the gauge, undo the screws on the outer edges of the dash, then remove screws in middle top and middle section of dash, and then lift up on the dash pad.
  • Kenneth
    Does this guage feature through the dial lighting for easy night viewing?
    1 Answer
    • customer service rep
      The gauge face is solid and is back illuminated, not through the dial. Exactly like the oem 2003-2005 Neon SRT4 boost gauge.
  • ryan
    will this gauge work with a 2013 dart 1.4 turbo
    1 Answer
    • Customer Service Rep
      This will work on any turbo car, you just need to run a vacuum line to the gauge.
  • Reznick
    Where is the best location for boost accuracy. What size hose/fittings are needed to tap into that line?
    1 Answer
    • Customer Service Rep
      We cannot write car specific instructions in this Q&A, but we will say you generally want to install the vacuum hose somewhere on the intake manifold AFTER the throttle body so you'll get both vacuum and boost readings. If you install the vacuum line before the throttle body in most cases you'll only get positive boost pressure.
  • Harold Iwan
    Does this gauge come with the wiring cause someone before me had replaced the factory one and no longer has the factory plug
    1 Answer
    • Customer Service Rep
      This gauge comes with a bulb, socket and wiring. The wiring ends with a positive and negative stripped wire that you'll need to hardwire in.
  • Keith Alexander
    Does this gauge come also with a black face plate
    1 Answer
    • Customer Service Rep
      Autometer does not have interchangeable faceplates. This gauge only comes with the silver face plate shown. If you want a black face, you'd need to get the same gauge but with black face. We just stock this silver face because its an exact match for the original equipment Neon SRT4 gauge. If you want a black -30/30 gauge, use the search bar and enter this part number: 601623-ESSERIES
Close