AGP Lower Hard Pipe (LHP), 03-05 Neon SRT-4

Review star icon Review star icon Review star icon Review star icon Review star icon
Model Number: 220236
Introducing the Lower Hard Pipe for the SRT-4. This piece replaces the factory rubber hose that goes from the hot side charge pipe to the inlet of the intercooler.

The LHP comes with a high polished aluminum tube with beaded ends along with all necessary hose clamps and 4 ply silicone connectors for a perfect fit.

$89.99

Ask a Product Question

  • Tory
    Will the AGP, LHP have fitment issues with the Spearco DFIC?
    Thanks.
    1 Answer
    • Modern Performance

      These items will work fine together.
  • Adam
    What diameter piping is the AGP LHP?
    1 Answer
    • customer service rep

      The piping diameter is 2.5 inches.
  • Ryan
    Dumb Question...What exactly is the Lower hard pipe and the upper hard pipe for?? Is it necessary to change these if your doing mods to your car or??....I'm going off of the bolt on upgrade plan on this page...
    1 Answer
    • customer service rep

      The lower hard pipe is a 90 degree bend of piping that attaches onto the factory hard piping and connects to the intercooler on passenger side. The upper hard pipe goes in between the throttle body and the intercooler. The lower hard pipe replaces the soft rubber connector and the uppipe allows you to install a blow off valve and get rid of the factory rubber and plastic piping.
  • Travis
    Will it fit the mpx bfmic?
    1 Answer
    • customer service rep

      This will work with any intercooler that utilizes factory style piping (Including the MPx front mount intercooler that you are asking about.)
  • Justin S
    Will this fit with the 2.5 inch vibrant hump couplers and T clamps?
    1 Answer
    • Customer Service Rep

      Yes, this pipe is 2.5 inch in diameter and if for some reason you have this pipe and need replacement couplers you'd get 2.5 inch couplers and clamps.
  • steve b
    is this needed if i purchase the ets hot side turbo to intercooler pipe? or is that ets pipe all you need?
    1 Answer
    • Customer Service Rep

      The AGP Lower hard pipe is designed to work with the factory piping. The ETS replaces all of the piping from the turbo to the intercooler. You cannot use the Lower Hard Pipe with the ETS piping.
  • Kevin
    Will this fit on a factory intercooler?
    1 Answer
    • Customer Service Rep

      Yes, this pipe has the identical same inlet and outlets as the factory piping except its not squished, soft rubber.
Close