MPx Cold Side Charge Pipe w/ HKS Blow Off Valve Flange, 03-10 PT Cruiser Turbo
+ ENLARGE IMAGE
Email iconEmail a Friend

MPx Cold Side Charge Pipe w/ HKS Blow Off Valve Flange, 03-10 PT Cruiser Turbo

Model Number: 331237-HKS-KIT

While designing our upgraded intercooler for the PT Cruiser Turbo, we were looking at the factory piping that went from the intercooler to the throttle body, and thought to ourselves, "we can do better than this"! The factory piping is made from rubber hosing which can expand under high boost levels, and it has a plastic restriction where the temp sensor and tip lines connect.

PT Cruiser 2.4 Turbo MPx Cold Side hard piping with blow off valve from Modernperformance.com on Vimeo.

Benefits
1) We created from scratch a one piece aluminum piping kit with couplers that eliminates all the factory piping on the cold side between the intercooler and throttle body(driver side). We have a welded on an HKS BOV flange that allows you to install the HKS blow off valve, which we consider to be the one of the best blow off valves on the market. It sounds great, and can withstand high boost pressures with no problems. The piping is powdercoated with a sleek wrinkle black finish that is durable and great looking!

2) We were also able to reduce the overall length of the piping by making smoother angles, and shortening the piping compared to the factory pipe. Shortening the piping and reducing sharp angles allows for the turbocharger to spool up faster with less restriction.

3)Lastly, we have welded on a threaded bung, and have included a threaded air intake temp sensor instead of the OEM plug in type temp sensor. This threaded temp sensor prevents the sensor from blowing out at high boost and or causing leaks!

Some of you have asked if we will make a MPx Cold Side Charge Piping kit without the HKS blow off valve flange. We might, but it all depends on the sales of this item. If we see little to no demand for this item, then we cannot justify making another style of piping for the PT Cruiser Turbo.

You can buy a brand new, made in Japan HKS blow off valve from us, or you can even buy a used HKS blow off valve off Ebay for $80-100. We have also seen knock off HKS blow off valves on Ebay from $15-$50.

Please note: if you install this, you need to block off the three bolt flange for the OEM diverter. The OEM diverter is on the turbo manifold near the firewall and angles downwards and towards the front of the car. It is right next to the turbo air intake inlet. Be sure to buy one when you buy this kit.

$219.99

Additional Options

AGP Blow Off Valve Block Plate, 03-05 Neon SRT-4 / 08-09 Caliber SRT-4
+ ENLARGE IMAGE

AGP Blow Off Valve Block Plate, 03-05 Neon SRT-4 / 08-09 Caliber SRT-4

Model Number: 220117
Do you intend to install a new blow off valve on your Neon SRT-4, Caliber SRT-4, or PT Cruiser GT? You're going to need Read more

MPx Blow Off Valve Block Plate, 03-05 Neon SRT-4 / 08-09 Caliber SRT-4
+ ENLARGE IMAGE

MPx Blow Off Valve Block Plate, 03-05 Neon SRT-4 / 08-09 Caliber SRT-4

Model Number: 220117-MACHINED
Going to install a new blow off valve on your Caliber SRT, Neon SRT, or PT Cruiser GT? You're going to need to install Read more

HKS Super SQV IV Blow Off Valve
+ ENLARGE IMAGE

HKS Super SQV IV Blow Off Valve

Model Number: 601111-V4
Introducing the HKS Super SQV IV Blow Off Valve! For those of you wondering what the difference is between SQV III Read more

HKS SSQV Blow Off Valve Version 4 Limited Edition Black
+ ENLARGE IMAGE

HKS SSQV Blow Off Valve Version 4 Limited Edition Black

Model Number: 601111-V4-BLACK
Introducing the HKS Super SQV IV Blow Off Valve in Limited Edition Black! For those of you wondering what the Read more

MPx Cold Side Charge Pipe w/ HKS Blow Off Valve Flange, 03-10 PT Cruiser Turbo, Turbo Upgrades & Accessories: Store Name

Ask a Product Question
  • Chaz
    Can I use my own RFL on this?
    1 Answer
    • Customer Service Rep
      This pipe is designed to work with the HKS blow off valve. It cannot be used with any other sort of blow off valve (Greddy, TurboXS, etc) as each different blow off valve has a different mounting flange. You can get a HKS from us, or buy a used HKS, or knock off HKS and use it with this.
  • Ben Blake
    Is this pipe available without the BOV flange?
    1 Answer
    • Customer Service Rep
      As of early 2020, we are only offering this with a HKS flange.
  • Brad Carpenter
    Is there an original location for the blow off valve that needs to be blocked with a plate or something?
    1 Answer
    • Customer Service Rep
      Yes, the three bolt OEM diverter valve is on the turbo manifold and needs to be blocked off if you install this.
  • Jason Arnold
    Will this setup work with a big turbo kit?
    1 Answer
    • Customer Service Rep
      As long as the turbo has a 2.5 inch inlet, sure. If you have a 3 inch or 4 inch inlet on the turbo, you'd need to use a silicone reducer coupler to go from this piping to whatever turbo you have.
Close