{"title":"95-99 Neon-2.4L Engine Swap Components-Engine Mounts, Adapters \u0026 Brackets","description":"","products":[{"product_id":"mpx-billet-aluminum-24-neonsrt-4pt-lower-alternator-bracket","title":"MPx Billet Aluminum 2.4 Neon\/SRT-4\/PT Lower Alternator Bracket","description":"\u003cp\u003eIf you have big camshafts, or removed balance shafts, or bad luck, (or all three) then there is a chance you might have had a cracked lower alternator bracket. It starts with a weird rattling noise, then you might even have problems tensioning the belt on the alternator. Low and behold you might ultimately find that you have a cracked cast aluminum OEM bracket.\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003eThis happens a lot more often than we would like. So, after Mopar decided to discontinue the OEM bracket, we decided to go ahead and make an all aluminum, billet, MADE IN THE USA bracket.\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003eThis bracket works on all 1995-2000 non turbo 2.4 engines frequently swapped into Neons as well as the turbo model 2.4 found in the 2003-2005 Dodge SRT-4 and 01-10 PT Cruiser (Turbo and Non Turbo). Reuse your old mounting bolts.\u003c\/p\u003e","brand":"Modern Performance","offers":[{"title":"Default Title","offer_id":42985365995598,"sku":"221155-LOWER","price":159.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/2781_10324_popup_f9556cf7-af98-4524-a6b0-908b7bc454de.jpg?v=1763688214"},{"product_id":"mpx-24l-engine-swap-power-steering-bracket","title":"MPx 2.4L Engine Swap Power Steering Bracket","description":"\u003cp\u003eIf you're planning on swapping a 2.4L engine into your 95-99 Neon and want power steering, in the past you'd more than likely use a PT Cruiser bracket. The problem with that power steering bracket was that it:\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003eDidnt have the correct spacing to place the power steering pump in line with the crank pulley. You have to then use a bunch of washers to space it in line with the crank pulley. \u003cbr\u003e\u003cbr\u003eThere are no adjustment slots cut to allow for the power steering to be tensioned. \u003cbr\u003e\u003cbr\u003eOver time, because the bracket only bolts on with two holes, it will begin to crack and fail like the bracket shown in the photos above. This has happened with a LOT of Neon owners with a 2.4L swap.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003eSo, in order to have a properly tensioning power steering pump, as well as have a solid bracket that will never crack, we came up with the MPx 2.4L Power Steering bracket.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003eCONSTRUCTION OF THE BRACKET\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003eThe MPx 2.4L Power Steering bracket is a 1\/4 inch steel bracket thats bent and welded solid and then powdercoated in semi gloss black for durability. Its held in place with THREE bolts to the block so that there is no twisting of the bracket. This bracket is so strong you could use it as a lifting point to pull the engine out of the engine bay!\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003eTENSIONING THE POWER STEERING PUMP\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003eIn order to make adjusting easy, we have put in a third bolt, as a pivot point on the power steering pump. This way in order to adjust the tension on the PS pump you just loosen the two bolts on the outside as well as the pivot point and the power steering pump with pivot on the axis of the pivot bolt. Then just tighten down all bolts and it will be held securely in place!\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003eUSING THIS BRACKET WITH VARIOUS INTAKE MANIFOLDS\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003eWe have test fitted the MPx Power Steering bracket with a stock intake manifold as well as the AMM (All Motor Mike) intake manifold and it fits perfectly. No clearance problems. We have not test fitted this bracket with other intake manifolds, but due to the design, we dont think there will be any clearance problems regardless.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cp\u003eWe provide all new bolts and washers to install this bracket so nothing else is needed to install.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003eBELT SIZING\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003eIf you're going to install power steering and ac, along with either the MPx pulley or the Unorthodox pulleys, the belt size is 15445 Gates brand belt or a 45 inch belt. You can purchase this belt seperately from us for $14.99.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003eIf you're going to only run power steering without AC along with a MPx or Unorthodox pulley, then the belt size is 37 inches, or a 15437 Gates belt. We do not supply this belt, but you can buy it at your local auto parts store.\u003c\/p\u003e\u003cbr\u003e","brand":"Modern Performance","offers":[{"title":"Default Title","offer_id":43050359849038,"sku":"221153-PSBRACKET","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/583_6537_popup.jpg?v=1762487024"},{"product_id":"mpx-24l-engine-swap-ps-bracket-engine-mount-adapter-package","title":"MPx 2.4L Engine Swap P\/S Bracket \u0026 Engine Mount Adapter Package","description":"\u003cp\u003eThis is a package deal of both the 2.4L Engine Swap power steering bracket and the 2.4L Engine swap adapter. This package of both popular items for 2.4L swap guys saves you some money!\u003cbr\u003e\u003cbr\u003eFor those of you who are going to attempt a 2.4L engine swap into your 95-99 Neon, you'll need this adapter to mount the engine to the passenger side engine mount.\u003cbr\u003e\u003cbr\u003eThis engine mount allows you to use your factory unmodified engine mount, along with the 95-99 STRATUS 2.4L engine mount to put any 2.4L engine into your car.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003eFor more information on this swap, please read about it in the Engine Swap section of www.neons.org. \u003cbr\u003e\u003cbr\u003eNote: The engine mount adapter is the billet aluminum \"A-shaped\" piece. It does NOT include the OEM Mopar side engine mount.\u003cbr\u003e\u003cbr\u003eDETAILS ON THE 2.4L Power Steering Bracket\u003cbr\u003e\u003cbr\u003eIf you're planning on swapping a 2.4L engine in your 95-99 Neon and want power steering, in the past you'd more than likely use a PT Cruiser bracket. The problem with that power steering bracket was that it:\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003eDidnt have the correct spacing to place the power steering pump in line with the crank pulley. You have to then use a bunch of washers to space it in line with the crank pulley. \u003cbr\u003e\u003cbr\u003eThere are no adjustment slots cut to allow for the power steering to be tensioned. \u003cbr\u003e\u003cbr\u003eOver time, because the bracket only bolts on with two holes, it will begin to crack and fail like the bracket below. This has happened with a LOT of Neon owners with a 2.4L swap.\u003c\/p\u003e\u003cbr\u003e","brand":"Modern Performance","offers":[{"title":"Default Title","offer_id":43050360143950,"sku":"221153-KIT","price":129.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/593_6536_popup.jpg?v=1762487024"},{"product_id":"mpx-24l-engine-motor-mount-adapter-95-99-neon","title":"MPx 2.4L Engine Motor Mount Adapter, 95-99 Neon","description":"\u003cp\u003eFor those of you doing a 2.4L engine swap into your 95-99 Neon, you'll need this adapter to mount the engine to the passenger side engine mount.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003eThis engine mount allows you to use your factory unmodified engine mount, along with the 95-99 Stratus 2.4L engine mount to put any 2.4L engine into your vehicle.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003eFor more information on this swap, please read about it in the engine swap section at\u003cbr\u003ewww.neons.org.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003eFor the three bolts that secure the adapter to the OEM aluminum mount, these should be torqued to 21 ft lbs.\u003c\/p\u003e","brand":"Modern Performance","offers":[{"title":"Default Title","offer_id":43050360176718,"sku":"221153","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/mpx24mountadapter4.jpg?v=1762487025"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/collections\/cdn.modernperformance_78_67679734-f222-4039-93e4-7301d8d5a4f8-1844585.png?v=1762487366","url":"https:\/\/www.modernperformance.com\/collections\/95-05-dodge-plymouth-neon-95-99-neon-2-4l-engine-swap-components-engine-mounts-adapters-brackets.oembed","provider":"Modern Performance","version":"1.0","type":"link"}