{"title":"13-18 Ford Focus- ST-  Interior \u0026 Gauges- OBDII Scan Gauges","description":"","products":[{"product_id":"aem-x-series-obdii-gauge","title":"AEM X-Series OBDII Gauge","description":"\u003cp\u003eAEM's X-Series OBDII Gauge puts multiple channels of data at your fingertips by reading the CAN bus stream of your vehicle's OBD port and transmitting those channels to the gauge display. It reads Diagnostic Trouble Codes and gives you the ability to clear codes. Wiring is as simple as connecting the gauge to your vehicle's OBDII port using the supplied connector! Because the X-Series OBDII gauge reads OBDII parameters transmitted through a vehicle's CAN datastream.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eEASY TO USE\u003c\/p\u003e\n\u003cp\u003eUse the 'Page' button on the gauge face to scroll through available channels of data transmitted through the OBD port. Possible channels are listed below and may include:\u003c\/p\u003e\n\u003cp\u003e-Intake air temp\u003cbr\u003e-Ambient air temp\u003cbr\u003e-Engine coolant temp\u003cbr\u003e-Fuel rail pressure\u003cbr\u003e-Engine RPM\u003cbr\u003e-Fuel system status - open loop\/closed loop\u003cbr\u003e-Timing advance\u003cbr\u003e-Intake manifold pressure\u003cbr\u003e-Boost pressure\u003cbr\u003e-Engine oil temp\u003cbr\u003e-Throttle position\u003cbr\u003e-Vehicle speed\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eand more (channel availability is ultimately dependent upon what channels are programmed to transmit by the vehicle manufacturer).\u003cbr\u003eREAD \u0026amp; CLEAR TROUBLE CODES\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe 'DTC' button tells the gauge to scan for trouble codes and will report any stored DTCs, allowing you to look them up and determine the course of repair. This button also allows users to clear DTCs once the problem is resolved.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe X-Series OBDII Gauge has a bright four-digit LED display that is 87% larger than our original digital gauges and provides better readability. A sweeping LED \"needle\" lines the edge of the gauge face for quick reference. A 33% overall increase in the gauge face display makes it easier to see at a glance. X-Series Gauges come with a black bezel and faceplate, and an optional silver bezel\/white faceplate accessory kit is available (special order).\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eDespite the larger display, X-Series Gauges are contained in a standard 2-1\/16th-inch (52mm) diameter housing for mounting in a standard gauge pod. Thanks to an advanced single board design, X-Series Gauges have an incredibly slim overall depth of under 0.825\", with a cup depth of only 0.200.\" This shallow cup depth allows X-Series Digital Gauges to be mounted practically anywhere.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThis will only work on 2008 and newer model year vehicles. Will not work on earlier 1995-2007 OBD vehicles.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eNOTE : We have found that this gauge will not work on the 1.4 Dart. It works on the 2.0\/2.4 Darts though.\u003c\/p\u003e","brand":"Modern Performance","offers":[{"title":"Default Title","offer_id":42945064829006,"sku":"601618","price":181.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/2154_7664_popup.jpg?v=1766116746"},{"product_id":"aeroforce-dual-interceptor-gauge-2013-18-focus-st","title":"Aeroforce Dual Interceptor Gauge, 2013-18 Focus ST","description":"\u003cp\u003eWe carry the Interceptor Dual Scan gauge for the 2013-2018 Ford Focus ST\/RS.\u003c\/p\u003e\n\u003cp\u003e?\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe Scan gauge, is a very special type of instrument gauge that connects within seconds to your cars OBD2 port, located right below your dashboard.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe OBD2 port is a diagnostic port that is used for dealerships, service stations, and even emissions testing facilities to connect a computer to your car to see how your cars running, problems with your car, etc. Because the OBD2 port communicates lots of different parameters of your engine, you can view tons of information! Furthermore, it will not interfere with the OBD2 ports operation, because it simply plugs in, and is not hardwired, and no wires are cut, chopped or soldered for the gauge to work!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eHeres a listing of some of the many different engine parameters that can be viewed with this gauge.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eRPM\u003cbr\u003eMPH\u003cbr\u003eIntake Air Temperature (post Intercooler)\u003cbr\u003eEngine Coolant Temperature\u003cbr\u003eBattery Voltage\u003cbr\u003eLong Term Fuel Trim\u003cbr\u003eShort Term Fuel Trim\u003cbr\u003eO2 Sensor Voltage\u003cbr\u003eManifold Pressure (vacuum\/boost) displayed in PSI\u003cbr\u003eIgnition Advance\u003cbr\u003eKnock Retard \u003cbr\u003eFuel Status (open\/closed loop)\u003cbr\u003eThrottle Position Percentage\u003cbr\u003eEngine Load\u003cbr\u003eAbility to check AND ERASE ENGINE CODES\u003cbr\u003eAbility to record engine parameters for 60 seconds and review parameters.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe Interceptor gauge is 52mm (2 1\/16\") in diameter and will fit in all standard gauge pods of this size. A 5' cable is included with appropriate OBD2 connector.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eA function menu is available by pushing both buttons simultaneously. One menu option allows you to enter a record mode. Once selected, the Interceptor will return to normal scan mode, but will start recording the displayed data automatically when the throttle exceeds 60%. Approximately 60 seconds of data will be stored. Returning to the menu screen, you can choose to replay the stored data on the Interceptor display.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe gauge displays 2 parameters at a time, but can be programmed to cycle through up to 8 parameters during a user determined period of time. This way you can monitor several items without taking any other actions.\u003cbr\u003ePlease note: Aeroforce is no longer shipping these guages with the metal U shaped bracket for mounting. They claim that they found almost all customers are using pods that dont require the metal U shaped bracket, and so they are no longer shipping these gauges with that bracket and nuts. If you are mounting this gauge into a pod, we would recommend using electrical tape around the body of the gauge for additional friction to hold it more tightly into the pod upon insertion.\u003c\/p\u003e","brand":"Modern Performance","offers":[{"title":"Default Title","offer_id":42959520301134,"sku":"214504-DUAL","price":439.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/1667_10904_large_6f3b8909-4746-42fd-8855-f555a69bc6bb.jpg?v=1762489090"},{"product_id":"aeroforce-interceptor-gauge-2013-18-focus-st","title":"Aeroforce Interceptor Gauge, 2013-18 Focus ST\/RS","description":"\u003cp\u003eWe carry the Interceptor Scan gauge for the 2013-2018 Ford Focus ST\/RS.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe Scan gauge, is a very special type of instrument gauge that connects within seconds to your cars OBD2 port, located right below your dashboard.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe OBD2 port is a diagnostic port that is used for dealerships, service stations, and even emissions testing facilities to connect a computer to your car to see how your cars running, problems with your car, etc. Because the OBD2 port communicates lots of different parameters of your engine, you can view tons of information! Furthermore, it will not interfere with the OBD2 ports operation, because it simply plugs in, and is not hardwired, and no wires are cut, chopped or soldered for the gauge to work!\u003c\/p\u003e\n\u003cp\u003eHere's a listing of some of the many different engine parameters that can be viewed with this gauge.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eRPM\u003cbr\u003eMPH\u003cbr\u003eIntake Air Temperature (post Intercooler)\u003cbr\u003eEngine Coolant Temperature\u003cbr\u003eBattery Voltage\u003cbr\u003eLong Term Fuel Trim\u003cbr\u003eShort Term Fuel Trim\u003cbr\u003eO2 Sensor Voltage\u003cbr\u003eManifold Pressure (vacuum\/boost) displayed in PSI\u003cbr\u003eIgnition Advance\u003cbr\u003eKnock Retard \u003cbr\u003eFuel Status (open\/closed loop)\u003cbr\u003eThrottle Position Percentage\u003cbr\u003eEngine Load\u003cbr\u003eAbility to check AND ERASE ENGINE CODES\u003cbr\u003eAbility to record engine parameters for 60 seconds and review parameters.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe Interceptor gauge is 52mm (2 1\/16\") in diameter and will fit in all standard gauge pods of this size. A 5' cable is included with appropriate OBD2 connector.\u003c\/p\u003e\n\u003cp\u003eA function menu is available by pushing both buttons simultaneously. One menu option allows you to enter a record mode. Once selected, the Interceptor will return to normal scan mode, but will start recording the displayed data automatically when the throttle exceeds 60%. Approximately 60 seconds of data will be stored. Returning to the menu screen, you can choose to replay the stored data on the Interceptor display.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe gauge displays 2 parameters at a time, but can be programmed to cycle through up to 8 parameters during a user determined period of time. This way you can monitor several items without taking any other actions.\u003cbr\u003ePlease note: Aeroforce is no longer shipping these guages with the metal U shaped bracket for mounting. They claim that they found almost all customers are using pods that dont require the metal U shaped bracket, and so they are no longer shipping these gauges with that bracket and nuts. If you are mounting this gauge into a pod, we would recommend using electrical tape around the body of the gauge for additional friction to hold it more tightly into the pod upon insertion.\u003c\/p\u003e","brand":"Modern Performance","offers":[{"title":"Default Title","offer_id":42959520366670,"sku":"214504","price":274.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/1666_10901_large_506eb1bd-1663-4383-ac80-5ed269495143.jpg?v=1762489090"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/collections\/1666_10901_large_506eb1bd-1663-4383-ac80-5ed269495143-6589388.jpg?v=1762487290","url":"https:\/\/www.modernperformance.com\/collections\/13-18-ford-focus-st-interior-gauges-obdii-scan-gauges.oembed","provider":"Modern Performance","version":"1.0","type":"link"}