{"title":"16-18 Ford Focus - RS - Interior \u0026 Gauges","description":"","products":[{"product_id":"aem-uego-x-series-wideband-gauge-with-black-face","title":"AEM Uego X-Series Wideband Gauge With Black Face","description":"\u003cp\u003eWhat's the difference between this Air\/Fuel gauge and the other digital Air\/Fuel gauge from AEM? There are two big selling features of this particular model. It has a much larger display, and it is ultra compact, being less than one inch in depth, it allows for more installation flexibility.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe X-Series wideband UEGO AFR sensor controller gauge (PN 30-0300) features a modern, visually striking faceplate and new seven-segment, center display that is 87% larger than the 30-4110 AEM\u003c\/p\u003e\n\u003cp\u003eThe gauge includes a 0-5v and RS232 Serial Port output for feedback control and data logging, and an AEMnet (CANbus) output for data logging.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eX-Digital wideband technology gives these controllers the ability to read and report values that other controllers do not, which can deliver more optimized engine tuning and a safer overall operating condition. Faster response time improves wideband feedback control, and can provide a safer, more powerful and accurate tune.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe X-Series Wideband UEGO AFR Sensor Controller Gauge is the common 52mm or 2 1\/16 inch size for easy mounting. Its slim depth (less than one inch overall) and ultra-slim cup depth of .200-inches dramatically increases its application base and potential mounting locations.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe X-Series Wideband UEGO AFR Gauge has a user configurable display via buttons on the gauge face that allows you to change AFR values for different fuels, Lambda or O2%, change the center display to three or four digits, perform a free-air calibration if desired as the sensor ages, and change the CAN message ID when linking multiple X-Series Inline Controllers or X-Series Controller Gauges. A black bezel and black dual-faced faceplate for air\/fuel and Lambda are included, and an optional silver bezel with white dual-faced air\/fuel and Lambda faceplate is available (PN 30-0300-ACC, sold separately). An Auto Dimming feature is included. Locking connectors ensure a positive connection between the harnesses and gauge and a new single board design adds to the new gauge's durability.\u003c\/p\u003e","brand":"Modern Performance","offers":[{"title":"Default Title","offer_id":42945064730702,"sku":"601617-X-UEGO","price":222.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/2748_10154_popup_ef1ae30b-dacb-4f75-9dc5-f42037add1c1.jpg?v=1766116747"},{"product_id":"aem-x-series-obdii-gauge","title":"AEM X-Series OBDII Gauge","description":"\u003cp\u003eAEM's X-Series OBDII Gauge puts multiple channels of data at your fingertips by reading the CAN bus stream of your vehicle's OBD port and transmitting those channels to the gauge display. It reads Diagnostic Trouble Codes and gives you the ability to clear codes. Wiring is as simple as connecting the gauge to your vehicle's OBDII port using the supplied connector! Because the X-Series OBDII gauge reads OBDII parameters transmitted through a vehicle's CAN datastream.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eEASY TO USE\u003c\/p\u003e\n\u003cp\u003eUse the 'Page' button on the gauge face to scroll through available channels of data transmitted through the OBD port. Possible channels are listed below and may include:\u003c\/p\u003e\n\u003cp\u003e-Intake air temp\u003cbr\u003e-Ambient air temp\u003cbr\u003e-Engine coolant temp\u003cbr\u003e-Fuel rail pressure\u003cbr\u003e-Engine RPM\u003cbr\u003e-Fuel system status - open loop\/closed loop\u003cbr\u003e-Timing advance\u003cbr\u003e-Intake manifold pressure\u003cbr\u003e-Boost pressure\u003cbr\u003e-Engine oil temp\u003cbr\u003e-Throttle position\u003cbr\u003e-Vehicle speed\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eand more (channel availability is ultimately dependent upon what channels are programmed to transmit by the vehicle manufacturer).\u003cbr\u003eREAD \u0026amp; CLEAR TROUBLE CODES\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe 'DTC' button tells the gauge to scan for trouble codes and will report any stored DTCs, allowing you to look them up and determine the course of repair. This button also allows users to clear DTCs once the problem is resolved.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe X-Series OBDII Gauge has a bright four-digit LED display that is 87% larger than our original digital gauges and provides better readability. A sweeping LED \"needle\" lines the edge of the gauge face for quick reference. A 33% overall increase in the gauge face display makes it easier to see at a glance. X-Series Gauges come with a black bezel and faceplate, and an optional silver bezel\/white faceplate accessory kit is available (special order).\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eDespite the larger display, X-Series Gauges are contained in a standard 2-1\/16th-inch (52mm) diameter housing for mounting in a standard gauge pod. Thanks to an advanced single board design, X-Series Gauges have an incredibly slim overall depth of under 0.825\", with a cup depth of only 0.200.\" This shallow cup depth allows X-Series Digital Gauges to be mounted practically anywhere.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThis will only work on 2008 and newer model year vehicles. Will not work on earlier 1995-2007 OBD vehicles.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eNOTE : We have found that this gauge will not work on the 1.4 Dart. It works on the 2.0\/2.4 Darts though.\u003c\/p\u003e","brand":"Modern Performance","offers":[{"title":"Default Title","offer_id":42945064829006,"sku":"601618","price":181.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/2154_7664_popup.jpg?v=1766116746"},{"product_id":"mpx-polished-shift-knob-2013-18-focus-st-2016-18-focus-rs","title":"MPx Polished Shift Knob, 2013-18 Focus ST \/ 2016-18 Focus RS","description":"\u003cp\u003eWith our 2013 Focus ST, we wanted a knob that felt more natural in our hand. So, we created a knob that was like more of a traditional ball knob, except that it has a lower skirt to cover some of the reverse lockout mechanism. This knob feels perfect to us!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis knob has the correct gate pattern engraved on the top, and it has our MPx engraving on the bottom skirt.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eInstallation couldn't be any easier! Simply unscrew the factory knob counterclockwise, and then screw on the new one clockwise until the gate is correctly aligned like factory.\u003c\/p\u003e","brand":"Modern Performance","offers":[{"title":"Default Title","offer_id":42945445429326,"sku":"214502","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/1568_2571_popup_f9d89a6c-0e39-4908-8640-03a48af2bc24.jpg?v=1767136818"},{"product_id":"glowshift-a-pillar-triple-gauge-pod-2013-18-focus-st-rs","title":"GlowShift A-Pillar Triple Gauge Pod, 2013-18 Focus \/ ST \/ RS","description":"\u003cp\u003eThis black A-pillar triple gauge pod is specifically designed for your 2013-18 Ford Focus \/ ST \/ RS, and allows you to mount three 2 1\/16th inch (52mm) gauges for a professional look.\u003c\/p\u003e \n\n\u003cp\u003eIt is manufactured from high quality ABS plastic that allows it to withstand cracking, fading, and warping, and can be easily painted with ABS plastic paint.\u003c\/p\u003e \n\n\u003cp\u003eThis gauge pod is easily mounted to your factory A-pillar with the included screws.\u003c\/p\u003e","brand":"Modern Performance","offers":[{"title":"Default Title","offer_id":42959345647694,"sku":"214505","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/1859_9262_large_bcacde83-58ca-4720-b3d9-8ff95493a38f.jpg?v=1762489090"},{"product_id":"expandable-circuit-fuse-for-use-with-gauges","title":"Expandable Circuit \u0026 Fuse (for use with Gauges)","description":"\u003cp\u003eThis Expandable Circuit \u0026amp; 4 Amp Fuse provides the ability to easily connect 12 volt powered accessories to your vehicle's fuse panel without having to cut or splice your vehicle's existing wiring.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003eDesigned to provide two fuse spots, one for your vehicle's existing fuse up to 10 Amps and another for the included 4 Amp fuse. Each Expandable Circuit offers plug and play connectivity for the Mini fuse and is 3\/8 of an inch in height.\u003c\/p\u003e","brand":"Modern Performance","offers":[{"title":"Default Title","offer_id":42959390310478,"sku":"601591","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/1857_4998_popup_4345c6ba-3570-4b69-935b-32e4af988427.jpg?v=1766116746"},{"product_id":"aem-uego-wideband-replacement-lsu-49-oxygen-sensor-cable","title":"AEM UEGO Wideband Replacement LSU 4.9 Oxygen Sensor Cable","description":"\u003cp\u003e\u003cb\u003eAEM has used two different oxygen sensors with their AEM Air Fuel ratio gauge kits.\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003ePlease look at our photos showing the difference in the connectors and compare to your existing oxygen sensor connector before purchasing.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003eIf you need replacement parts for the AEM UEGO Wideband Gauge, you're in luck! We stock replacement oxygen sensors, oxygen sensor cables, and power cables.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003eThis listing is for the AEM UEGO LSU 4.9 Oxygen Sensor Cable. This cable runs between the oxygen sensor and the gauge, and is a perfect for replacement for cables damaged by road debris, etc.\u003c\/p\u003e","brand":"Modern Performance","offers":[{"title":"Default Title","offer_id":42959390441550,"sku":"601617-CABLE4.9","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/2055_7173_popup.jpg?v=1762489090"},{"product_id":"aem-uego-wideband-replacement-lsu-49-oxygen-sensor","title":"AEM UEGO Wideband Replacement LSU 4.9 Oxygen Sensor","description":"\u003cp\u003eAEM has used two different oxygen sensors with their AEM Air Fuel ratio gauge kits. Please look at our photos showing the difference in the connectors and compare to your existing oxygen sensor connector before purchasing.\u003c\/p\u003e\n\u003cp\u003eAEM's Bosch LSU 4.9 Wideband UEGO O2 replacement sensor kit includes only the sensor (with attached cable and male connector) and is intended to replace an existing mounted wideband sensor used with AEM Digital Wideband UEGO Air\/Fuel Controller.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003eThese sensors have a laser-etched, calibrated resistor in the sensor's connector body. This resistor is specifically created for the exact sensor that it is attached to. Modifying this will invalidate the sensor's output. The wideband sensor is laboratory-calibrated at the Bosch factory, accurate to 0.1 AFR and never requires free-air calibration when used with an AEM wideband AFR controller.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003eAccurate to 0.1 AFR\u003cbr\u003eNever requires free-air calibration when used with an AEM Controller and connector plug.\u003cbr\u003eSpecifically designed for use with AEM Wideband UEGO controller\u003cbr\u003eReplacement sensor only\u003c\/p\u003e","brand":"Modern Performance","offers":[{"title":"Default Title","offer_id":42959390670926,"sku":"601617-SENSORLSU","price":149.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/1741_5895_popup_fb6b460c-ce8c-47d7-b058-18d87fc43409.jpg?v=1766116746"},{"product_id":"aem-uego-wideband-replacement-lsu-42-oxygen-sensor","title":"AEM UEGO Wideband Replacement LSU 4.2 Oxygen Sensor","description":"\u003cp\u003eAEM has used two different oxygen sensors with their AEM Air Fuel ratio gauge kits. Please look at our photos showing the difference in the connectors and compare to your existing oxygen sensor connector before purchasing.\u003c\/p\u003e\n\n\n\u003cp\u003eIf you need replacement parts for the AEM UEGO Wideband Gauge, you're in luck!\u003c\/p\u003e\n\n\u003cp\u003eModern Performance keeps replacement parts such as the cable and oxygen sensor in stock at all times. Both are sold separately.\u003c\/p\u003e\n\n\u003cp\u003eThis part listing is for the AEM UEGO Oxygen Sensor. It is the original equipment sensor that comes with the AEM UEGO kit. Perfect for replacement if yours was damaged by road debris, or somehow malfunctioned.\u003c\/p\u003e","brand":"Modern Performance","offers":[{"title":"Default Title","offer_id":42959390703694,"sku":"601617-SENSOR","price":113.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/348_4736_popup_0d1f328e-bf91-4062-96d3-f1735197f2ca.jpg?v=1766116746"},{"product_id":"aem-uego-digital-air-fuel-ratio-wideband-gauge","title":"AEM UEGO Digital Air Fuel Ratio Wideband Gauge","description":"\u003cp\u003eIf you've done modifications to your car and you want to accurately monitor how its running, this is the piece you need! This allows you to make sure the engine isnt running lean and make sure its running well.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAEM's Wideband UEGO Air\/Fuel mixture ratio gauge features an LED readout and sweeping LED \"needle\" that changes colors as AFR changes from rich to lean.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe unit's 52mm 2-1\/16\") gauge housing fits in most gauge pods and can be remotely mounted virtually anywhere. Create four different looks with one kit to match your interior!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNo laptop required for monitoring\u003c\/li\u003e\n\u003cli\u003eBosch sensor included!\u003c\/li\u003e\n\u003cli\u003e24 Color-coded LED display lights provide immediate reference to engine's air\/fuel ratio (AFR) or Lambda\u003c\/li\u003e\n\u003cli\u003eIntegrated three-digit display reveals AFR or Lambda in real time\u003c\/li\u003e\n\u003cli\u003eUser-programmable 0-5v analog output included for use with data loggers and ANY engine management system\u003c\/li\u003e\n\u003cli\u003eDoes not oscillate AFR like narrow band sensors\u003c\/li\u003e\n\u003cli\u003eSerial data stream included for output of AFR (RS 232)\u003c\/li\u003e\n\u003cli\u003eAccurate to 0.1 AFR\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Modern Performance","offers":[{"title":"Default Title","offer_id":42959390736462,"sku":"601617","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/55_4729_popup_9d905aa7-5e04-4a4b-9fe1-ce55aa908090.jpg?v=1766116746"},{"product_id":"aem-tru-boost-x-gauge-style-electronic-boost-controller","title":"AEM Tru Boost X Gauge Style Electronic Boost Controller","description":"\u003cp\u003eThe Tru-BoostX Boost Controller Gauge delivers all of the features you loved about the original only now with AEMnet for data logging and a big, fat internal MAP sensor that can handle boost pressures up to 80 PSI of boost.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Tru-BoostX Boost Controller gauge delivers digital accuracy but with the simplicity of a manual boost controller. All programming is done using the faceplate buttons and no laptop is required. AEM's specially designed Boost Control Solenoid and all necessary hardware is included.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eProgram Two Boost Levels + Scramble Boost Setting\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e- Program two boost modes for different levels of performance (up to 80PSIg internal MAP sensor), and program a time-based scramble boost setting that is controlled using a switched input. You can also turn off the controller and use the gauge as a display.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eChange Wastegate Open Pressure\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e- Ideal for reducing boost spikes and improving spool up.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisplay Boost Levels in PSIg (PSI), BAR or kPa (PAS)\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e-See your boost in the units you prefer, and scale the 24 outer LEDs to match your peak boost levels for the perfect sweeping motion.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSet Alarms and Display Peak Boost\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e- Set the 24 green outer LEDs to flash based on boost pressure so you are alerted to an overboost condition. A ground output is included for triggering an optional LED warning light.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eOverboost Protection Built In\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e- Protects your engine from an overboost condition by shutting the boost control solenoid off until it is reactivated by you through the buttons on the faceplate.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eIntegrated Error Protection\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e- Alerts you to a fault if the boost control solenoid is shorted or disconnected so you are never left guessing whether the Tru-BoostX is operational.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDatalog using AEMnet CAN bus\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e- Outputting channels over AEMnet provides so much more than just boost pressure! Send 13 channels of data over a 2-wire connection, including boost pressure, peak boost, boost target, boost scramble duty, overboost status, wastegate crack pressure, boost control solenoid status and more.\u003c\/p\u003e\n\u003cp\u003ePlease note: this gauge comes with a black bezel and black face. AEM sells a Tru Boost X accessory pack that includes a silver bezel and face, which you can mix and match to your desire. You can have a black bezel and black face combo, black bezel and silver face combo, silver bezel and black face combo.\u003c\/p\u003e","brand":"Modern Performance","offers":[{"title":"Default Title","offer_id":42959485435982,"sku":"601626-X","price":389.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/76_9319_popup_4f295531-19ea-42f5-94aa-36a47dc48757.jpg?v=1766116746"},{"product_id":"aem-digital-oilwatertrans-temperature-gauge-100-300-degree","title":"AEM Digital Oil\/Water\/Trans Temperature Gauge (100-300 Degree)","description":"\u003cp\u003eAEM's digital Oil Temperature display gauge delivers unsurpassed accuracy and visibility. Each gauge includes 24 color-coded (Red, Green, Yellow) LED lights that change from green to yellow to red for immediate reference to the measured parameter, and an integrated thee-digit display that reveals real-time operating conditions.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003eAEM's digital display gauges feature a standard 52mm gauge housing that fits in most gauge pods and can be remotely mounted virtually anywhere. Each gauge includes interchangeable silver and black bezels and black and white faceplates to personalize the look of your gauges like having four gauge designs in one!\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGauge temperature range 100-300F\u003c\/li\u003e\n\u003cli\u003eIncludes easy-to-install harness and sensor\u003c\/li\u003e\n\u003cli\u003eComplete stand alone gauge requires no additional sensors or programs to operate.\u003c\/li\u003e\n\u003cli\u003eLED displays provide precise reference to critical operating conditions and alert driver of potentially damaging operating conditions\u003c\/li\u003e\n\u003cli\u003eIncludes 0-5V analog output for routing to engine management system or data logger\u003c\/li\u003e\n\u003cli\u003eEasy to read faceplates\/displays are designed to complement existing AEM gauge styles\u003c\/li\u003e\n\u003cli\u003eIncluded bezels and face plates allow you to personalize the look of your gauge\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Modern Performance","offers":[{"title":"Default Title","offer_id":42959503196238,"sku":"601629","price":216.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/468_5912_popup.jpg?v=1766116746"},{"product_id":"aem-digital-oilfuel-pressure-gauge-0-100-psi","title":"AEM Digital Oil\/Fuel Pressure Gauge (0-100 PSI)","description":"\u003cp\u003e\u003cspan\u003eAEM's digital Oil\/Fuel Pressure display gauge delivers unsurpassed accuracy and visibility.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eEach gauge includes 24 color-coded (Red, Green, Yellow) LED lights that change from green to yellow to red for immediate reference to the measured parameter, and an integrated thee-digit display that reveals real-time operating conditions.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAEM's digital display gauges feature a standard 52mm gauge housing that fits in most gauge pods and can be remotely mounted virtually anywhere. Each gauge includes interchangeable silver and black bezels and black and white faceplates to personalize the look of your gauge it's like having four gauge designs in one!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFeatures\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes easy-to-install harness and sensor\u003c\/li\u003e\n\u003cli\u003eComplete stand alone gauge requires no additional sensors or programs to operate\u003c\/li\u003e\n\u003cli\u003eIdeal for both fuel injected and carbureted motors\u003c\/li\u003e\n\u003cli\u003eLED displays provide precise reference to critical operating conditions and alert driver of potentially damaging operating conditions\u003c\/li\u003e\n\u003cli\u003eIncludes 0-5V analog output for routing to engine management system or data logger\u003c\/li\u003e\n\u003cli\u003eEasy to read faceplates\/displays are designed to complement existing AEM gauge styles\u003c\/li\u003e\n\u003cli\u003eIncluded bezels and face plates allow you to personalize the look of your gauge\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Modern Performance","offers":[{"title":"Default Title","offer_id":42959503229006,"sku":"601628","price":216.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/510_4737_popup_e376dc3e-55d0-48d4-a716-27e09eb773b8.jpg?v=1766116746"},{"product_id":"autometer-electric-oil-pressure-gauge-0-100-psi","title":"Autometer Electric Oil Pressure Gauge (0-100 PSI)","description":"\u003cp\u003eFor those of you who want to monitor your oil pressure, we offer this electronic oil pressure gauge from Autometer. \u003cbr\u003e\nThis gauge is 2 1\/16 inch size, so it will fit most popular gauge pods and pillars. \u003cbr\u003e\nThis gauge comes with the nuts and bracket to secure it to pods\/pillars, and it comes with the mechanical pressure sensor as well for you to install.\u003c\/p\u003e","brand":"Modern Performance","offers":[{"title":"Default Title","offer_id":42959503294542,"sku":"601620-ULTRALITE","price":109.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/416_5897_popup.jpg?v=1762489090"},{"product_id":"aeroforce-dual-interceptor-gauge-2013-18-focus-st","title":"Aeroforce Dual Interceptor Gauge, 2013-18 Focus ST","description":"\u003cp\u003eWe carry the Interceptor Dual Scan gauge for the 2013-2018 Ford Focus ST\/RS.\u003c\/p\u003e\n\u003cp\u003e?\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe Scan gauge, is a very special type of instrument gauge that connects within seconds to your cars OBD2 port, located right below your dashboard.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe OBD2 port is a diagnostic port that is used for dealerships, service stations, and even emissions testing facilities to connect a computer to your car to see how your cars running, problems with your car, etc. Because the OBD2 port communicates lots of different parameters of your engine, you can view tons of information! Furthermore, it will not interfere with the OBD2 ports operation, because it simply plugs in, and is not hardwired, and no wires are cut, chopped or soldered for the gauge to work!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eHeres a listing of some of the many different engine parameters that can be viewed with this gauge.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eRPM\u003cbr\u003eMPH\u003cbr\u003eIntake Air Temperature (post Intercooler)\u003cbr\u003eEngine Coolant Temperature\u003cbr\u003eBattery Voltage\u003cbr\u003eLong Term Fuel Trim\u003cbr\u003eShort Term Fuel Trim\u003cbr\u003eO2 Sensor Voltage\u003cbr\u003eManifold Pressure (vacuum\/boost) displayed in PSI\u003cbr\u003eIgnition Advance\u003cbr\u003eKnock Retard \u003cbr\u003eFuel Status (open\/closed loop)\u003cbr\u003eThrottle Position Percentage\u003cbr\u003eEngine Load\u003cbr\u003eAbility to check AND ERASE ENGINE CODES\u003cbr\u003eAbility to record engine parameters for 60 seconds and review parameters.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe Interceptor gauge is 52mm (2 1\/16\") in diameter and will fit in all standard gauge pods of this size. A 5' cable is included with appropriate OBD2 connector.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eA function menu is available by pushing both buttons simultaneously. One menu option allows you to enter a record mode. Once selected, the Interceptor will return to normal scan mode, but will start recording the displayed data automatically when the throttle exceeds 60%. Approximately 60 seconds of data will be stored. Returning to the menu screen, you can choose to replay the stored data on the Interceptor display.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe gauge displays 2 parameters at a time, but can be programmed to cycle through up to 8 parameters during a user determined period of time. This way you can monitor several items without taking any other actions.\u003cbr\u003ePlease note: Aeroforce is no longer shipping these guages with the metal U shaped bracket for mounting. They claim that they found almost all customers are using pods that dont require the metal U shaped bracket, and so they are no longer shipping these gauges with that bracket and nuts. If you are mounting this gauge into a pod, we would recommend using electrical tape around the body of the gauge for additional friction to hold it more tightly into the pod upon insertion.\u003c\/p\u003e","brand":"Modern Performance","offers":[{"title":"Default Title","offer_id":42959520301134,"sku":"214504-DUAL","price":439.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/1667_10904_large_6f3b8909-4746-42fd-8855-f555a69bc6bb.jpg?v=1762489090"},{"product_id":"aeroforce-interceptor-gauge-2013-18-focus-st","title":"Aeroforce Interceptor Gauge, 2013-18 Focus ST\/RS","description":"\u003cp\u003eWe carry the Interceptor Scan gauge for the 2013-2018 Ford Focus ST\/RS.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe Scan gauge, is a very special type of instrument gauge that connects within seconds to your cars OBD2 port, located right below your dashboard.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe OBD2 port is a diagnostic port that is used for dealerships, service stations, and even emissions testing facilities to connect a computer to your car to see how your cars running, problems with your car, etc. Because the OBD2 port communicates lots of different parameters of your engine, you can view tons of information! Furthermore, it will not interfere with the OBD2 ports operation, because it simply plugs in, and is not hardwired, and no wires are cut, chopped or soldered for the gauge to work!\u003c\/p\u003e\n\u003cp\u003eHere's a listing of some of the many different engine parameters that can be viewed with this gauge.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eRPM\u003cbr\u003eMPH\u003cbr\u003eIntake Air Temperature (post Intercooler)\u003cbr\u003eEngine Coolant Temperature\u003cbr\u003eBattery Voltage\u003cbr\u003eLong Term Fuel Trim\u003cbr\u003eShort Term Fuel Trim\u003cbr\u003eO2 Sensor Voltage\u003cbr\u003eManifold Pressure (vacuum\/boost) displayed in PSI\u003cbr\u003eIgnition Advance\u003cbr\u003eKnock Retard \u003cbr\u003eFuel Status (open\/closed loop)\u003cbr\u003eThrottle Position Percentage\u003cbr\u003eEngine Load\u003cbr\u003eAbility to check AND ERASE ENGINE CODES\u003cbr\u003eAbility to record engine parameters for 60 seconds and review parameters.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe Interceptor gauge is 52mm (2 1\/16\") in diameter and will fit in all standard gauge pods of this size. A 5' cable is included with appropriate OBD2 connector.\u003c\/p\u003e\n\u003cp\u003eA function menu is available by pushing both buttons simultaneously. One menu option allows you to enter a record mode. Once selected, the Interceptor will return to normal scan mode, but will start recording the displayed data automatically when the throttle exceeds 60%. Approximately 60 seconds of data will be stored. Returning to the menu screen, you can choose to replay the stored data on the Interceptor display.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe gauge displays 2 parameters at a time, but can be programmed to cycle through up to 8 parameters during a user determined period of time. This way you can monitor several items without taking any other actions.\u003cbr\u003ePlease note: Aeroforce is no longer shipping these guages with the metal U shaped bracket for mounting. They claim that they found almost all customers are using pods that dont require the metal U shaped bracket, and so they are no longer shipping these gauges with that bracket and nuts. If you are mounting this gauge into a pod, we would recommend using electrical tape around the body of the gauge for additional friction to hold it more tightly into the pod upon insertion.\u003c\/p\u003e","brand":"Modern Performance","offers":[{"title":"Default Title","offer_id":42959520366670,"sku":"214504","price":274.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/1666_10901_large_506eb1bd-1663-4383-ac80-5ed269495143.jpg?v=1762489090"},{"product_id":"aem-digital-voltmeter-gauge-8-18v","title":"AEM Digital Voltmeter Gauge (8-18V)","description":"\u003cp\u003eAEM's digital Voltmeter display gauge delivers unsurpassed accuracy and visibility. Each gauge includes 24 color-coded (Red, Green, Yellow) LED lights that change from green to yellow to red for immediate reference to the measured parameter, and an integrated thee-digit display that reveals real-time operating conditions.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAEM's digital display gauges feature a standard 52mm gauge housing that fits in most gauge pods and can be remotely mounted virtually anywhere. Each gauge includes interchangeable silver and black bezels and black and white faceplates to personalize the look of your gauge's like having four gauge designs in one!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGauge voltage range 8-18V\u003c\/li\u003e\n\u003cli\u003eIncludes easy-to-install harness and sensor\u003c\/li\u003e\n\u003cli\u003eComplete stand alone gauge requires no additional sensors or programs to operate\u003c\/li\u003e\n\u003cli\u003eIdeal for both fuel injected and carbureted motors\u003c\/li\u003e\n\u003cli\u003eLED displays provide precise reference to critical operating conditions and alert driver of potentially damaging operating conditions\u003c\/li\u003e\n\u003cli\u003eIncludes 0-5V analog output for routing to engine management system or data logger\u003c\/li\u003e\n\u003cli\u003eEasy to read faceplates\/displays are designed to complement existing AEM gauge styles\u003c\/li\u003e\n\u003cli\u003eIncluded bezels and face plates allow you to personalize the look of your gauge\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Modern Performance","offers":[{"title":"Default Title","offer_id":42959565062222,"sku":"601627","price":133.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/469_6277_popup.jpg?v=1766116746"},{"product_id":"autometer-mechanical-boost-gauge-30-30-carbon-fiber-3","title":"Autometer Mechanical Boost Gauge (-30\/+30), Carbon Fiber","description":"\u003cdiv class=\"sku\"\u003eThis Autometer Carbon Fiber gauge shows a full 30 vacuum to 30 psi of boost.\u003c\/div\u003e\n\u003cdiv class=\"prod-desc\"\u003e\n\u003cbr\u003e\n\u003cp\u003eWhether it's to upgrade or replace a malfunctioning gauge this 30\/30 gauge will fit almost everyone's needs. Includes hardware for a basic install.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Modern Performance","offers":[{"title":"Default Title","offer_id":43032705531982,"sku":"601623-CARBONFIBER","price":109.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/1535_5954_popup.jpg?v=1767136207"},{"product_id":"autometer-mechanical-boost-gauge-30-30-black-4","title":"Autometer Mechanical Boost Gauge (-30\/+30), Black","description":"\u003cp\u003eIf you're interested in a -30 vacuum \/ +30 boost gauge with a clean black face this is it.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003eThis Autometer 2 1\/16 inch gauge lights up red and looks great!\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003e\u003cb\u003eNote:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eUnlike the silver and carbon fiber face boost gauges from Autometer, this gauge has a small LED board that changes the gauge dimensions slightly. As a result, the gauge may protrude from the in-dash gauge pod on the Neon SRT-4. The simple fix for this issue is to wrap a strip of black electrical tape around the body of the gauge, just behind the face bezel, to conceal the exposed portion.\u003c\/p\u003e\n","brand":"Modern Performance","offers":[{"title":"Default Title","offer_id":43044427006030,"sku":"601623-ESSERIES","price":104.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/cdn.modernperformance_93_369c25fc-951d-4e7b-a4c5-f8272fe90b3c.png?v=1762487244"},{"product_id":"autometer-mechanical-boost-gauge-30-30-silver-3","title":"Autometer Mechanical Boost Gauge (-30\/+30), Silver","description":"\u003cp\u003eThis Autometer gauge shows a full 30 vacuum to 30 psi of boost.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003eWhether it's to upgrade or replace a malfunctioning gauge this 30\/30 gauge will fit almost everyone's needs. Includes hardware for a basic install.\u003c\/p\u003e\n","brand":"Modern Performance","offers":[{"title":"Default Title","offer_id":43044427923534,"sku":"601623-ULTRALITE","price":94.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/54_10085_popup_f2e23c74-b25a-4362-b481-721db8411924.jpg?v=1766115966"},{"product_id":"aem-digital-boost-gauge-30-35","title":"AEM Digital Boost Gauge (-30\/+35)","description":"\u003cp\u003eAEM's digital Boost display gauge delivers unsurpassed accuracy and visibility. Each gauge includes 24 color-coded (Red, Green, Yellow) LED lights that change from green to yellow to red for immediate reference to the measured parameter, and an integrated thee-digit display that reveals real-time operating conditions.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003eAEM's digital display gauges feature a standard 52mm gauge housing that fits in most gauge pods and can be remotely mounted virtually anywhere. Each gauge includes interchangeable silver and black bezels and black and white faceplates to personalize the look of your gauge! Its like having four gauge designs in one!\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003e\n- Gauge pressure range -30 to 35psi\u003cbr\u003e- Includes easy-to-install harness and sensor\u003cbr\u003e- Complete stand alone gauge requires no additional sensors or programs to operate\u003cbr\u003e- Ideal for both fuel injected and carbureted motors\u003cbr\u003e- LED displays provide precise reference to critical operating conditions and alert driver of potentially damaging operating conditions\u003cbr\u003e- Includes 0-5V analog output for routing to engine management system or data logger\u003cbr\u003e- Easy to read faceplates\/displays are designed to complement existing AEM gauge styles\u003cbr\u003e- Included bezels and face plates allow you to personalize the look of your gauge\u003c\/p\u003e","brand":"Modern Performance","offers":[{"title":"Default Title","offer_id":43044428283982,"sku":"601630","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/467_5924_popup.jpg?v=1766115966"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/collections\/cdn.modernperformance_1-6232498.png?v=1762487294","url":"https:\/\/www.modernperformance.com\/collections\/13-18-ford-focus-rs-interior-gauges.oembed","provider":"Modern Performance","version":"1.0","type":"link"}