{"title":"08-10 Chevrolet HHR SS-Turbo Accessories","description":"\u003cp\u003eForge Diverters and boost leak testers for your Chevrolet HHR SS. \u003c\/p\u003e","products":[{"product_id":"go-fast-bits-gfb-diverter-valve-08-10-cobalt-ss-w-20l-turbo","title":"Go Fast Bits GFB Diverter Valve, 08-10 Cobalt SS \/ HHR SS \/ Cadillac \/ Regal w\/ 2.0L Turbo","description":"\u003cp\u003eGoFastBits DV+ diverter valve, when you want no noise, no nonsense just performance!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTHE SIMPLE \u0026amp; ESSENTIAL MOD FOR 30% QUICKER BOOST\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eBy retaining the factory ECU control and recirculating the vented air. The DV+ is a purely performance oriented product that offers the following benefits:\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e-Sharper throttle response\u003cbr\u003e-Faster boost recovery on gearshift\u003cbr\u003e-Solves boost leaking issues\u003cbr\u003e-Built to last\u003c\/p\u003e","brand":"Modern Performance","offers":[{"title":"Default Title","offer_id":42953728557134,"sku":"243194","price":166.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/2914_10891_popup.jpg?v=1767136694"},{"product_id":"mpx-40-boost-leak-tester","title":"MPx 4.0\" Boost Leak Tester","description":"\u003cp\u003e\u003cb\u003eThis listing is for 4 inch MPx boost leak tester, which is for use with BIG AFTERMARKET Turbos. This will NOT WORK WITH THE FACTORY TURBO on the Neon SRT-4\/Caliber SRT-4\/Cobalt SS. If you have a Factory turbo, see our listing for a 2.5 inch inlet boost leak tester.\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003eHave you ever experienced any of these situations with your turbocharged car?\u003c\/p\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eHad less peak boost than you had a few months ago ?\u003c\/li\u003e\n\u003cli\u003eDoes your car seem a little bit slower ?\u003c\/li\u003e\n\u003cli\u003eEver wonder if you could have a leaking pressure pipe in your engine?\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cp\u003eIf you've answered yes to any of the above questions, then this device could come in very handy.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003eThis device is a piece of test equipment that will allow you to find out if there are any leaks from any hoses, clamps, cracked housings that could be leaking boost.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003eThe boost leak tester is a very simple piece to use, you simply remove the intake tubing to the turbo, and then clamp on the boost leak tester onto the turbo inlet. Then pressurize the turbo and piping with a air compressor. This will fill the piping with compressed air and will allow you to listen for any leaks.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003e\u003cb\u003eDESIGN\u003c\/b\u003e\u003cbr\u003eThe MPx boost leak tester is made with a 3 ply silicone rubber coupler for secure sealing to the turbo, uses a aluminum machined end cap, and a pressed in brass threaded tire valve.\u003c\/p\u003e\u003cbr\u003e","brand":"Modern Performance","offers":[{"title":"Default Title","offer_id":42975252742222,"sku":"601140-4INCH","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/614_9277.jpg?v=1762488744"},{"product_id":"mpx-25-boost-leak-tester","title":"MPx 2.5\" Boost Leak Tester","description":"\u003cp\u003eThis listing is for 2.5 inch inlet turbos (2.5 inch inlet is standard on the factory size turbo on the 2003-2005 Dodge SRT-4, 2008-2009 Dodge Caliber SRT-4, 2003-2010 Chrysler PT Cruiser Turbo and 2008-2009 Chevrolet Cobalt SS Turbo.)\u003c\/p\u003e\n\u003cp\u003eHave you ever experienced any of these situations with your turbocharged car?\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHad less peak boost than you had a few months ago ?\u003c\/li\u003e\n\u003cli\u003eDoes your car seem a little bit slower ?\u003c\/li\u003e\n\u003cli\u003eEver wonder if you could have a leaking pressure pipe in your engine?\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIf you've answered yes to any of the above questions, then this device could come in very handy.\u003c\/p\u003e\n\u003cp\u003eThis device is a piece of test equipment that will allow you to find out if there are any leaks from any hoses, clamps, cracked housings that could be leaking boost.\u003c\/p\u003e\n\u003cp\u003eThe boost leak tester is a very simple piece to use, you simply remove the intake tubing to the turbo, and then clamp on the boost leak tester onto the turbo inlet. Then pressurize the turbo and piping with a air compressor. This will fill the piping with compressed air and will allow you to listen for any leaks.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDESIGN\u003c\/b\u003e\u003cbr\u003eThe MPx boost leak tester is made with a silicone rubber coupler for secure sealing to the turbo, uses a aluminum machined end cap, and a pressed in brass threaded tire valve.\u003c\/p\u003e","brand":"Modern Performance","offers":[{"title":"Default Title","offer_id":42975252774990,"sku":"601140","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/570_9276_popup.jpg?v=1766116566"},{"product_id":"forge-vented-diverter-valve-08-10-cobalt-ss-hhr-ss-cadillac-regal-20-turbo-engines","title":"Forge Vented Diverter Valve, 08-10 Cobalt SS \/ HHR SS \/ Cadillac \/ Regal 2.0 Turbo Engines","description":"\u003cp\u003eThe OEM diverter is mounted on the turbo, and is built with a rubber seal, and a spring. Once vacuum from the intake manifold pulls on the diverter, the valve will open and release air from the turbo. Over time, the rubber seal becomes brittle and wont seal as well. The spring can become weaker as well, which will cause the diverter to not seal as well, and you'll loose boost pressure. Especially at higher boost pressures!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis is the fix for this. This made from scratch aluminum diverter is made in Great Britain, and is made to handle high boost pressures. It has brand new seals, aluminum piston and has variable springs for different boost pressures. This will hold your higher boost pressures and help restore some of the boost pressure that may have been leaking out.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis diverter is different than the standard one Forge Diverter valve, because it does not release compressed air back to the turbo. This valve is a vented style that releases pressurized air to atmosphere. This will cause a cool whoosh noise, however, because GM cars are mass air flow sensor cars, air is metered by the air flow sensor, and there is supposed to be no release of air after the meter. So, if you install this vented valve on a mass air flow sensor car, the car will run rich after each time the valve opens. The best way to get around this, is stick with a non vented valve if you dont care about sound, or if you want the whoosh noise its best to get a tune installed on your pcm that can accomodate for a vented atmosphere valve. Most tuners can cut back on some of the fuel after each shift to reduce the effect of having a vented diverter valve and power loss after shifts.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eThis Forge diverter valve fits the following vehicles:\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cb\u003e2005-2010 Cobalt Turbo\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003e2008-2010 Chevrolet HHR Turbo2.0 Buick Regal Turbo2008-2010 Pontiac Solstice2008-2010 Saturn Sky RedlineCadillac CTS\/CT6\/XT4\/ATS with 2.0 turbo engine\u003c\/b\u003e\u003c\/p\u003e","brand":"Modern Performance","offers":[{"title":"Default Title","offer_id":42975257428046,"sku":"243191-VENTED","price":219.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/1379_9603_popup.jpg?v=1767136584"},{"product_id":"forge-diverter-valve-08-10-cobalt-ss-hhr-ss-cadillac-regal-w-20l-turbo","title":"Forge Diverter Valve, 08-10 Cobalt SS \/ HHR SS \/ Cadillac \/ Regal w\/ 2.0L Turbo","description":"\u003cp\u003eThe OEM diverter is mounted on the turbo, and is built with a rubber seal, and a spring. Once vacuum from the intake manifold pulls on the diverter, the valve will open and release air from the turbo. Over time, the rubber seal becomes brittle and wont seal as well. The spring can become weaker as well, which will cause the diverter to not seal as well, and you'll loose boost pressure. Especially at higher boost pressures!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis is the fix for this. This made from scratch aluminum diverter is made in Great Britain, and is made to handle high boost pressures. It has brand new seals, aluminum piston and has variable springs for different boost pressures. This will hold your higher boost pressures and help restore some of the boost pressure that may have been leaking out.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eThis diverter comes with two springs, green is pre-installed for 15-22 psi, and a yellow accessory spring for higher boost levels.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eBelow is a video we made explaining the benefits of the Forge valve and why its better than the OEM diverter.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003ciframe height=\"375\" width=\"500\" src=\"https:\/\/player.vimeo.com\/video\/141703212\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eBelow is a video of a Cobalt Turbo on YouTube demonstrating the Forge Diverter valve.\u003cbr\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/AwDNPHWMDWg\" height=\"315\" width=\"530\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eThis Forge diverter valve fits the following vehicles:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2005-2010 Cobalt Turbo\u003c\/li\u003e\n\u003cli\u003e2008-2010 Chevrolet HHR Turbo\u003c\/li\u003e\n\u003cli\u003e2.0 Buick Regal Turbo\u003c\/li\u003e\n\u003cli\u003e2008-2010 Pontiac Solstice\u003c\/li\u003e\n\u003cli\u003e2008-2010 Saturn Sky Redline\u003c\/li\u003e\n\u003cli\u003eCadillac CTS\/CT6\/XT4\/ATS with 2.0 turbo engine\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Modern Performance","offers":[{"title":"Default Title","offer_id":42975259820110,"sku":"243191","price":159.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/794_9606_popup.jpg?v=1767136584"},{"product_id":"tial-tls-q-blow-off-valve","title":"Tial TLS Q Blow off Valve","description":"\u003cp\u003eTial's 50mm Q Series BOV flows 60% more than its predecessor, making it the highest flowing 50mm BOV on the market, and bolts to any standard TiAL flange without welding.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAn included Aluminum weld mounting flange cut for 2-1\/2'' pipe and CNC machined aluminum V-band mounting clamp with stainless steel hardware create a durable corrosion-free appearance.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eA banjo-type aluminum air fitting and bolt with 1\/4\" hose barb allow quick actuator response.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTechnical Specifications:\u003cbr\u003eFor use on turbo-charged and super-charged applications (Paxton, Vortec, etc.) The body and all internal components of the blow off valve are CNC machined from aluminum alloy. It features a large 1.98'' (50.5mm) valve.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe V-Band design aluminum mounting clamp gives a very clean and unique appearance. The clamp uses Stainless Steel hardware for a long lasting, corrosion-free appearance.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe valve seal utilizes a high temperature resistant o-ring that is clamped in place to prevent the possibility of sticking to the seat and pulling out. The valve stem and guide are hard anodize-coated for wear resistance.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Blow Off Valve also comes with a machined aluminum banjo-type air fitting and bolt, with oversized 10mm hose barb for quick actuator response. The actuator has a high temp silicone reinforced diaphragm for long life.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAn aluminum weld base mounting flange is furnished with each unit\u003cbr\u003eThrough countless hours of R\u0026amp;D Tial was able to make the same size valve flow a staggering 60% more than the original design - that means 60% more air is blown off per cycle!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis is the highest flowing BOV on the market\u003cbr\u003eA single Q BOV can support up to 1,800hp\u003cbr\u003eAnodized aluminum color options (Silver, Red, Blue, Purple, Black)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eThese blow off valves have a 10lb spring, to easily handle upwards of 25-35 psi of boost.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Modern Performance","offers":[{"title":"Purple","offer_id":43730005622862,"sku":"601146-6","price":278.95,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":43730005655630,"sku":"601146-5","price":278.95,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":43730005688398,"sku":"601146-3","price":278.95,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":43730005721166,"sku":"601146-4","price":278.95,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":43730005753934,"sku":"601146-1","price":278.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/tialbov5.jpg?v=1778185626"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/collections\/614_9277_large_a5812b9b-5318-4ee0-b4cb-d77585a14b2b-7023753.jpg?v=1766880025","url":"https:\/\/www.modernperformance.com\/collections\/08-10-chevrolet-hhr-ss-turbo-accessories.oembed","provider":"Modern Performance","version":"1.0","type":"link"}