Wire Tuck Engine Harness, 03-05 Neon SRT-4
Model Number: 701152-AC
We now carry the Kinnettic Kreations Wire Tuck Engine Harness for the 03-05 Neon SRT-4.
This is a brand new tucked SRT-4 engine harnesses. Pre-wired for WOT boxes and the PCM connector detaches from engine harness. Either to later hook up to our tucked engine bay harnesses, or for easily wiring in standalone/piggyback controllers like MS, FIC, or any others.
Front half of harness runs up underneath the intake manifold where it splits to all the sensors on front of block. Back half routes runs under oil pan next to transmission. 1 split runs along the jackshaft housing to the o2 sensor, alternator, and up around to the coil pack while the other branch runs up to C101 however fits with your exhaust setup.
6-pin connector next to C101 has the wires for the WOT box run to it, and comes with a jumper plugged in, looping the ASD wire feeding the injectors and coil pack. Simple unplug jumper, plug in our WOT box adapter harness, and run harness through firewall. Plug into the wot box, and hook up the clutch pedal jumper. No splicing required! Or, get the plug and play Wire Tuck Engine Harness wot box kit (sold seperately).
Includes connections for the following:
A/C Clutch
A/C Switch
Alternator
C101
Cam Sensor
Coil Pack
Coolant
Crank
IAC
Injectors 1-4
Intake Temp
Knock
MAP Sensor
O2 Sensor
Oil Pressure
Speed Sensor
Starter
TPS
WOT Box