NGK Iridium Spark Plugs, 03-05 Neon SRT-4 / 03-07 PT Cruiser GT

Review star icon Review star icon Review star icon Review star icon Review star icon
Model Number: 220143

These spark plugs are the most popular, and best spark plug available for the Dodge SRT-4/PT Turbo. Why? Well, they have excellent heat durability, help provide a consistent spark that will help you have a smoother idle, eliminate any stumbling, and maximize power!

  • Stock heat range- Stock heat range is for cars that are BONE stock with no increase in boost.
  • 1 Step Colder- Is for 90% of SRT-4 /PT Turbo drivers out there, who have increased the boost with a good number of bolt on mods.
  • 2 Steps Colder- For big turbo, big turbo engines only, in the 450+hp range.
  • These plugs need to be gapped to match your power levels. If you are at stock boost levels, then you will need to gap to roughly .035-.038 thousandths. If you have increased boost levels and are making 275-350 horsepower you should adjust the gap to .030-.033 thousandths. If you are making 350-450 horsepower we recommend .028 thousandths. The more boost you have, the lower the gap.

    Price is for a set of four (4)

    $29.99
    NGK Iridium Spark Plugs, 03-05 Neon SRT-4 / 03-07 PT Cruiser GT, Ignition & Electrical: Store Name

    Ask a Product Question

    • Anonymous
      What should one step colder be gapped at? Im running a Mopar stage 3 with turbo toys Tial mecanical wastegate and my PSI spikes around 24.5
      1 Answer
      • Modern Performance

        Low 30's, we'd recommend anywhere from 28-33 for gap for that level of boost.
    • cj
      what should these be gapped at for a stage 2 no toys
      1 Answer
      • Modern Performance

        We'd recommend a .36-.40 gap.
    • Ryan
      05 srt cai, stock range plug or would 1 step colder help, or hurt any?? Thanks
      1 Answer
      • Modern Performance

        If you have less than 15 psi of boost, stock heat range. If you have 15-22 psi of boost with stock turbo, 1 range colder plugs.
    • Jason
      Stock Turbo, cold air intake, larger intercooler (Stupid Racoon), Tune. 1 step colder plugs. What should the gap be?
      1 Answer
      • Modern Performance

        Your gap is determined by 1) turbo and 2) boost. You never mentioned boost level so its difficult to answer your question. If you are 14-16 psi then you should be about 40 thousandths. If you are 17-20 then you should be closer to 35 thousandths.
    • Sam
      What are the one step colder plugs gapped at? If they're pretty gapped at all..
      1 Answer
      • customer service rep

        These do not come pre-gapped, you need to gap them yourself based on your cars turbo/boost pressure.
    • Anonymous
      I am running a .50 trim with over 25psi of boost. should I run the 1 step colder?
      1 Answer
      • customer service rep

        At least two range colder, 28-32 thousandths.
    • Anonymous
      stock turbo 14psi, cai, larger intercooler, 3in downpipe, full 3in exhaust, and a tune. would "stock" plugs work or 1 step colder?
      1 Answer
      • customer service rep

        Stock boost level- stock plugs
        Increased boost 17-20 psi one range colder
        Bigger turbo? More boost? Two ranges colder
    • ragan
      I'm in the middle of running I ran the step colder plugs burnt em out now I'm running the coldest. I having a fully build motor,stage three cams larger valves 70 trim Garrett, what would be the best gap. I'm doing low boost pulls right now 15 psi but will be going to 25 + where should the gap be
      1 Answer
      • customer service rep

        At 25 psi, you should be in very low 30's or high 20 thousandths.
    • Anonymous
      Have syked ecu stage1,intake, front mount, 3in exsaust no cat.. 2003 srt4...boost spikes at19.. Drops to 15... What should gap b at?
      1 Answer
      • customer service rep

        Most stock turbo cars should be in the .034-.040 range. The more boost, the lower the gap. Close to 20 psi, should be somewhere between .034-.036.
    • Ryan
      If I'm going with the stage 1 basically using the stock turbo to its fullest potential...What would u recommend as plugs and the gap??

      (I'm going off of your guys bolt-on upgrade plan)
      1 Answer
      • customer service rep

        We would recommend one range colder NGK iridium plugs and a .38 thousandth gap.
    • Brink
      What spark plug wires should I run with the 1 step colder?
      1 Answer
      • Customer Service Rep

        Any of the wires we offer will work great with the NGK plugs.
    • Hunter Piatt
      What if I have a stock turbo running stock boost but have bolt ons like agp waste gate, turbo xs blowoff valve, front mount, CAI, and MSD wires?
      1 Answer
      • Customer Service Rep

        If you have not increased boost, you should go with stock heat range. If you increase boost, then you get one range colder.
    • KODY STONE
      I usually run the normal heat range, but I run around 20-24 boost,and was curious if I should go to 1 step colder, and if so what gap? I have a big intercooler, stage 2 injectors , adjustable waste gate, 3 bar map and tip, boomba fuel rail, full MPx exhaust - down pipe, injen intake. Fully built/upgraded Cooling system. (built trans but thats unrelated)
      1 Answer
      • Customer Service Rep

        You never mentioned which turbo you have, so we will assume stock turbo. If that is the case, you should only use one range colder plugs. If you have increased boost levels and are making 275-350 horsepower you should adjust the gap to .030-.033 thousandths
    • ED
      I'm running E85, full bolts on around 390hp, right now 20psi but will be going 30psi. What would u recommend as plugs?
      1 Answer
      • Customer Service Rep

        Please read the text on this page, we give suggestions on plug gap and heat range.
    Close