DiabloSport inTune i3 Platinum Tuner, 08-09 Caliber SRT-4
+ ENLARGE IMAGE
Email iconEmail a Friend

DiabloSport inTune i3 Platinum Tuner, 08-09 Caliber SRT-4

Review star icon Review star icon Review star icon Review star icon Review star icon
Read or Write Review
Model Number: 601143-I3

FREE FedEx Ground Shipping!!!

Looking to step up the performance on your 2008-2009 Caliber SRT-4? . DiabloSport's inTune i3 Performance Programmer is an easy way to boost power and torque without even popping the hood!

Diablosport tuning increases the boost by a few psi, along with improved fuel tuning to give you a solid 20-30 horsepower and 40-50 lbs of torque! Also this tuning upgrade that makes your throttle more responsive, optimizes drivability, improves fuel economy potential and increases horsepower and torque! The inTune i3 programmer is pre-loaded with dyno-tested performance programs designed specifically for your ride. Within minutes, you could add horsepower and torque with no other tools required! You simply flash your pcm with the handheld tuner through the OBD2 port under the dash from the comfort of the drivers seat!

Check out this great video on youtube showing boost levels before and after on a Caliber SRT-4!

inTune i3 Features:

Back in the olden days if you wanted to increase the boost pressures on your turbocharged car you would need a boost controller. The boost controller would allow you to take control of the boost pressure, but whatever you set the boost pressure to, it would cause you to have the same boost pressure in every gear. This is not optimal for a front wheel drive car. You need to step the boost to have traction and acceleration! If you have 15 psi in first gear you'll only have wheel spinning while the other car you are racing is taking off! This Diablosport tuner tunes your Caliber SRT-4 so that you have stepped boost like the factory design, but ups the boost on average 3-5 psi in every gear.

Features:


  • New "Easy Tune" Mode for Simple Installation
  • Dyno Tested Performance Programs
  • Blazing Fast Vehicle Read/Write Times
  • Windows, Mac OSX and Linux Connectivity
  • OBD-II Data Logging
  • Read and Clear DTC
  • Purchase Multi-Vehicle Licenses

    • Not available for sale or use on pollution controlled vehicles in the state of California. Please see our other listing for the California edition.

    $430.00
    DiabloSport inTune i3 Platinum Tuner, 08-09 Caliber SRT-4, Electronics: Store Name

    Ask a Product Question
    • Scott
      Can this be used with an existing ms1 tune?
      1 Answer
      • Customer Service Rep
        This tuner, when you install the tune, will save whatever tune you have on your car currently in the Diablosport and then write its performance flash into the pcm. So if you have the Mopar stage 1 tune it will save that file and load the Diablosport tune onto your car and if you wanted later to put the stage 1 tune back on your car you could.
    • Jay
      Can it set launch control and can I use it with my stage 1 mopar tune already installed
      1 Answer
      • Customer Service Rep
        No, there is no launch control with this tuner. You can use a N2MB wot box for that though. If you use this tuner, it will save the file off your pcm, and then flash your pcm with the new coding. So, it doesn't matter what pcm code you have, once you use this, it overwrites what used to be on the computer, and saves the file in case you ever want to go back to the Mopar stage 1 tune.
    • Jeremy
      Can this tuner store multiple custom tunes?
      1 Answer
      • Customer Service Rep
        Yes, the I3 can store multiple tunes, in addition to allowing you to buy licenses for several vehicles so you can tune multiple cars with one I3.
    • Joe
      Does this tune make more boost psi then the stage 1 tune? How much hp does it add over stock?
      1 Answer
      • Customer Service Rep
        Stock boost level is 5 psi in first gear, 10 in second, 10 psi in third.
        With the Diablosport, you'll get 12 psi in first, 16 in second, and 16 in third.
        The Mopar stage 1 upgrade, discontinued around 2011, had a peak output of about 14-15 psi.
    • Jaran407
      Can I tune injectors with Diablosport?
      1 Answer
      • Customer Service Rep
        There are two things you can do with the Diablosport - you can install the tune thats on it for use with your factory turbo, or you can do a custom tune to accommodate any special injectors, or larger turbo. The custom tunes need to be done with a Diablosport custom tuner person, and generally cost $250-$400. You cannot change injectors without a custom tune or else the car will run terrible.
    • Joe
      Do you recommend upgrading the waste gate when using this tuner?
      1 Answer
      • Customer Service Rep
        This Diablosport is designed to work with the stock wastegate actuator. However, it will also work great with the AGP adjustable wastegate actuator. You'll build boost even faster with a stronger AGP wastegate with the Diablosport tune.
    • Storm
      Do you have to leave it plugged in or can you flash it and unplug it
      1 Answer
      • Customer Service Rep
        You plug the Intune into your OBD2 port under the dash on drive side. Then, follow the steps on the Intune to program the new performance tune onto the ECU. The process takes about 10 minutes. We recommend hooking up a battery charger to your battery during the process because if the battery goes below a certain voltage it can corrupt the tune. Then after the tune is installed, remove the handheld tuner and put the Intune in the glove box. You do not need to leave it plugged in afterwards.
    • Jeff
      Do I need different spark plugs for the easy tune to work properly? I have the new NGK Rutheniums installed currently.
      1 Answer
      • Customer Service Rep
        Once you increase the boost by a large amount (ie, 5 psi or more) you should use a colder range plug. We highly recommend the NGK iridium plugs, and have not had any experience with the Ruthenium plug.
    Close