MPx Clutch Pedal Pivot Arm and Bushing 03-05 SRT4 Model: 220173 $38.99

Problem: For 03-05 SRT4's, the hydraulic clutch master cylinder connects to the clutch pedal via whats called a Clutch Pivot. The master cylinder connects to the clutch pivot and has a plastic locking clip to hold it in place. Over time ,the plastic locking clip will break, and or wear away and cause inconsistent clutch engagement/disengagement.

So, we designed a piece that would replace the factory plastic clutch pivot piece altogether with an alumium body, bearing grade bronze bushing, steel cover plate, grade 8 bolt and e-clip.

This gives you a MUCH more solid clutch feel, and will eliminate any clutch inconsistencies. Plus, its very simple to install, and only requires a socket set, and about 5 minutes to remove the factory piece and install the MPx clutch pivot arm!

Heres a photo showing the stock Clutch pivot arm, versus the MPx Clutch pivot arm.

Photo of factory Clutch Pivot arm on the clutch pedal. The Clutch master cylinder rod is disconnected in this photo.

This is what the MPx Clutch Pivot arm and bushing looks like installed on the clutch pedal.