Click the thumbnails for larger images.     Notice the two allen head screws we include in the kit that fit flush into the tb. Also notice how well the butterfly plate seals inside the tb.   Please note: Automatic and Manual throttle bodies will function with cruise control.	Shown here, is the Polished MPx 60mm throttle body. It comes with all you see: The TB, new gasket, and new Allen head bolts.  (Polished Throttle Bodies are NO longer available! Silver ONLY!)
Notice the difference in inside diameter of the stock manual tb versus the 60mm tb. Notice here that all screw holes, linkages, vacuum ports and sensor mounting locations are identical to stock tb.	We are pleased to announce the new 60 mm MPx throttle bodies from Modern Performance. These are designed to work perfectly with the 95-99 DOHC & SOHC Neon & Eclipse. They are painstakingly crafted on a CNC machine and then assembled with brass vacuum ports, brass butterfly plates and anodized aluminum throttle linkages. It was our goal to create a superior alternative to the bored throttle bodies and that would allow us to create a larger diameter throttle body than what we could make with a bored stock throttle body.  These throttle bodies are superior to stock throttle bodies and bored stock throttle bodies in numerous ways. First of all, these are crafted from the ground up to flow more than any stock throttle body ever could. These are 55mm or 60 mm from top to bottom, no restrictions whatsoever. There are no modifications needed to make the wiring, or sensors fit onto the throttle body
Notice how all holes are finished, how well the bottom of the butterfly plate seals to the tb and the attention to detail.	Newest revision: Allows you to adjust the throttle spring pressure to your liking. You now have two levels, firm, and ultra firm. Therefore, you can easily switch back and forth, and or, if several years from now your throttle spring starts getting a little softer than you like, you can take it up one notch to make it more firm. Whats awesome about it, is that you can switch back and forth between spring rates within seconds, with only your hands. NO tools needed, no need to remove tb, etc. (see pic below)   The throttle bodies have an extra port on the front of the throttle body as well for any vacuum line attachments you need to hook up for boost gauges, temperature probes etc. Most importantly, these will not crack, nor have any butterfly fitment problems like some bored stock throttle bodies have had in the past.
Here is a picture of the 60mm tb shown with the stock 95-99 Neon / Eclipse sensors. Your stock Neon / Eclipse sensors will fit perfectly with NO modification whatsoever. No modification to your wiring harness either is needed.	For anyone that's serious in modifying their Neon, we recommend this high flowing CNC machined throttle body. It will dramatically improve airflow into the manifold, as well as make your Neon /Eclipse a lot more peppy on the lower end. For our customers who don't want to bore out their manifolds, we recommend going with the 55mm throttle body, and for customers who want to go larger, and or bore their manifold we recommend the 60mm throttle body. (Boring of the manifold to match the opening of the 60 mm throttle body is optional, but helps the throttle body reach its potential)
Notice how everything fits and operates so perfectly. We put all our efforts into this throttle body from top to bottom to make it shine in detail and function.	PLEASE NOTE: These throttle bodies will fit all intake systems and turbo kits that use silicone or rubber hoses to attach onto the stock throttle body. ALSO, THE 55 MM & AUTOMATIC THROTTLE BODIES ARE DISCONTINUED AND NO LONGER AVAILABLE.